Table of Contents
Advertisement
Quick Links
IMPORTANT: SAFETY INSTRUCTIONS
IMPORTANT: Instructions de securité
When installing and using this electrical equipment, basic safety precautions should always be followed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Always be sure the unit is unplugged during installation or service procedures.
3. The ultraviolet light produced by the UV lamp is harmful to your eyes. Do not look directly at
the lamp. Should it become necessary to view the lamp, use UV-protected sunglasses.
Lors de l'installation et de l'utilisation de cet équipement, des précautions devront être suivies.
1- Lire et suivre les étapes attentivement.
2- Assurez vous de toujours débrancher avant l installation ou le service.
3- Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,
veuillez porter les lunettes de soleil contre les rayons U.V.
MU7-50SR
Installation & Maintenance Instructions
MultiVoltage UVC System
Each unit is shipped with the germicidal lamp placed in a
UNPACKING THE UNIT
box with protective packaging. When handling the lamp
take care to not touch the glass portion of the lamp with
bare hands. Oils from the hands can cause "hot spots" which
reduce lamp life. Handle by the socket end or use a soft cloth.
If you accidentally touch a lamp, clean it using the included
alcohol cleaning pad or a soft cloth damp-ened with
rubbing alcohol. The lamp is fragile and proper care must
be taken when removing from packaging.
The following parts are included:
• Power Supply with remote lamp assembly
• One (1) Germicidal Twin H Lamp (packed in lamp box)
• Eight (8) Sheet Metal Screws
• Two (2) caution labels
• Installation & maintenance instructions
• Strain relief connector
• Alcohol cleaning pad
Advertisement
Table of Contents
Related Manuals for PremierOne MU7-50SR
Summary of Contents for PremierOne MU7-50SR
- Page 1 MU7-50SR MultiVoltage UVC System Installation & Maintenance Instructions Each unit is shipped with the germicidal lamp placed in a UNPACKING THE UNIT box with protective packaging. When handling the lamp take care to not touch the glass portion of the lamp with bare hands.
- Page 2 • Do not locate the unit within 20” of plastic material that will be directly exposed to the UV light, INSTALLATION: such as wiring, return-side humidifier or certain types of air filters. Check with the filter manufacturer to see if their material is UV resistant. Over time, UV light may degrade plastic. •...
- Page 3 This warranty does not cover any labor or damage resulting from improper installation or abuse. Use of any lamp other than a genuine PremierOne lamp designed for this device will void the warranty.
- Page 4 1. Using the lamp mount as a template, draw the hole pattern on the air duct in a suitable location. 2. Using a 1 1/4 inch Vari Bit, make two holes side by side. Clean off excess metal between the two holes with tin snips.
- Page 5 Photo C Photo A Photo B...
Need help?
Do you have a question about the MU7-50SR and is the answer not in the manual?
Questions and answers