Fuel Filter Replacement - Beta Marine BetaSet 7 Installation Manual

Heat exchanger, keel & radiator cooled
Table of Contents

Advertisement

FUEL FILTER REPLACEMENT

1. The fuel filter is a spin on type. Remove by turning
anti-clockwise when viewed face on or from below.
2. Replace the fuel filter cartridge every 750 hours or
every 2 years. Please refer to image 53.
3. Spread a thin film of diesel fuel around the new filter`s
rubber gasket to ensure a good seal and screw in
hand tight.
NB: It is best practice to have either a drip tray or cloth
wrapped round the filter to catch any fuel that maybe left
in the system and assist with keeping the bilge clean.
4. Bleed fuel system as detailed in 'Installation
Guidelines' page 52 & 53.
5. Check for leaks.
IMPORTANT!
Keep flexible mounts free from diesel fuel,
engine coolant & lubrication oil to prevent
deterioration.
Fuel filter location:
HEAT EXCHANGER
BetaSet-BetaGen 7, 10 & 12
Forward end, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 14 & 21
Under air filter, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 26, 33, 40, 49, 40T IIIA & 49T IIIA
Aft engine, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 4/2, 6/2, 11/2, 22/2 & 25/2
Forward end, starboard side when viewed from the AC
alternator end.
53
KEEL COOLED
BetaSet-BetaGen 7, 10 & 12
Aft engine, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 14 & 21
Under air filter, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 26, 33, 40, 49, 40T IIIA & 49T IIIA
Aft engine, starboard side when viewed from the AC
alternator end.
BetaSet-BetaGen 4/2, 6/2, 11/2, 22/2 & 25/2
Mid engine, starboard side, when viewed from the AC
alternator end.
69

Advertisement

Table of Contents
loading

Related Products for Beta Marine BetaSet 7

Table of Contents