Maintenance Schedule - Beta Marine BetaSet 7 Installation Manual

Heat exchanger, keel & radiator cooled
Table of Contents

Advertisement

Maintenance Schedule

Check engine oil level
Change engine oil
Change engine oil filter
Check engine coolant/antifreeze level
Check engine coolant/antifreeze
Check battery fluid
Check belt tension/s and alternator bolts
Check raw water inlet strainer is
Drain off any water in fuel/water separator
Change diesel fuel filter
Check all external nuts, bolts and fastenings.
Check condition of all coolant, fuel, oil pipes
and clamps
Lubricate keyswitch on control panel with
petroleum jelly/WD40 or equivalent - if
applicable
Check sacrificial anode, replace if
necessary - increase inspection frequency
if heavy erosion
experienced***
Remove heat exchanger tube stack, clean
and replace rubber
o-rings***
Check sea water pump impeller
and change if
worn***
Check air cleaner element, clean and
change if required - increase inspection
frequency if heavy soiling is experienced
Change air cleaner element
Check valve clearance
Check injection nozzle pressure
*
Shallow sump equipped engines only
**
Replace engine coolant/antifreeze every other year or 500hrs if sooner
***
Heat exchanger cooled only
Daily or
after every
8hrs running
condition**
clear***
After first
After first
Every
25hrs
50hrs
150hrs*
65
Annually
Every
Every
or 250hrs
750hrs
1500hrs
if sooner

Advertisement

Table of Contents
loading

Related Products for Beta Marine BetaSet 7

Table of Contents