Advertisement
DO NOT USE THE PBM VIBRATION DEVICE WHEN IT IS CHARGING OR CONNECTED TO ANY EXTERNAL POWER SOURCE.
HOW TO CHARGE THE BATTERY PACK
To charge, insert the charging cable into the USB port of the battery pack and connect to the power adapter.
When charging the 4 white lights near to the charging cable connection will blink.
Full charge is indicated when the white lights become solid. A full charge takes up to 6 hours.
A fully charged device is ready to be used for approximately eight sessions.
As the device is powered by a lithium battery, the battery capacity will gradually decrease with long term usage.
HOW TO USE THE MOUTHPIECE
1.
Connect the mouthpiece to the battery pack via the power cable. Gently and firmly fit the two connections together. The battery
normally turns on and indicates the charging level. If it does not, press the battery switch on the side.
2.
Place the mouthpiece inside your mouth, make sure that it is centered in your jaw (use front teeth as reference).
3.
Gently hold the mouthpiece in place with light biting pressure. Firm, gentle pressure will need to be maintained during the 4-minute
session to ensure the vibrations carry directly on the aligners or onto the teeth if being treated with braces.
4.
Press the on-off switch located in the middle of the power cable, the indicator will blick for 5 seconds and then you will experience a
slight vibration on all of your teeth. Then, the light indicator will stop blinking and the treatment starts.
After 4 minutes, you will hear a beep sound, and the light will turn off and the switch will change colours. Treatment is complete.
5.
A slight vibration and pulsing feeling might be felt in your jaw/gingival area after extended usage; this is a natural result of
microvibrations produced by the device.
4 mins
TOTAL TREATMENT TIME:
Total: 4 minutes for the upper arch and lower arch together
4 mins
2
Advertisement
