Turtle Beach Stealth 600 Gen 2 Frequently Asked Questions Manual

Stealth 600 Gen 2 USB For Xbox - Frequently Asked Questions (FAQ)
Stealth 600 Gen 2 USB For Xbox - No Mic Audio
The Stealth 600 Gen 2 USB For Xbox has a flip-to-mute mic. To use the mic, gently push ("flip") the mic
forwards. You will hear a tone (low high) when the mic is unmuted. When the mic is fully flipped
forwards, it will "lock" into position. To mute the mic, just flip the mic back the other way. You will hear
a tone (high low) when the mic is muted.
If other players are unable to hear you in Xbox Live/Party chat, or in an in-game chat on your Xbox
console, please check the following.
1. The Headset/Transmitter Are Paired/Headset Is Detected By Console
The headset and transmitter need to be paired in order to be used for game and chat audio. If the
headset and transmitter are not paired, you will likely not be able to hear the incoming game/chat
audio, or be heard clearly in chat.
To verify that the headset and transmitter are successfully paired to each other:
Make sure the transmitter is plugged in to the console, and the headset is powered on. Then,

look at the LEDs on the headset and transmitter. Both should be solid green.
If the transmitter or headset LEDs are double-blinking green, the headset and transmitter are likely not
paired, and the pairing process will need to be performed again. To do so:
1. Connect the transmitter to the USB port on the Xbox console.
2. Press and hold the power button to power the headset on.
3. Wait for the headset and transmitter to pair. When the headset and transmitter are successfully
paired, the LEDs on both will turn solid green.