Table of Contents
Advertisement
REMOTE CONTROL INSTRUCTIONS
REMOTE CONTROL INSTRUCTIONS
Field Controls Dehumidifi ers can be controlled using an optional remote accessory. The remote
connects to your dehumidifi er via a 25' CAT 5 cable, with the integrated sensor giving you mul-
tiple options for monitoring surrounding conditions.
Example #1- Install the dehumidifi er in the laundry room and
duct it into the living room. Mount the remote in the living room and use the remote sensor.
Example #2- Install the dehumidifi er in your crawl space with
the remote mounted in your garage.
NOTE: The symbols indicated
below only show when the
remote is powered on.
1. On/Off (Power) Button
Press the on/off button and the
machine will start running. Press
the button again to turn the
machine off .
2. Up Button/ Down Button
Use the up and down arrows to
adjust the humidity level.
3. Mode
Use the mode button to switch
between dehumidifi er and a ducted
application.
• The
symbol on the display indicates the sensor on the remote control is being utilized.
• The
symbol on the display indicates the sensor on the dehumidifi er is being utilized.
4. Temperature
The T button changes the temperature reading on your remote. The remote comes from the
factory in Celsius. Press this button once to switch to Fahrenheit.
5. Continuous
Press this button to switch the unit into continuous mode. "CONT. " will appear on the display
screen.
6. Drain Pump
This button is not used for these models.
P/N 780107800 09/21 RevA
Page 6 of 12
Advertisement
Table of Contents
