Advertisement
§
Y35
configuration menus (when using the ICD, Finger Mouse, or IR Remote control
v2
interfaces) are accessed from:
Main Menu
o
§
When connecting wirelessly through the Android compatible G4 Connect™ app.,
configuration menus are accessed from:
Preferences → Config
o
§
Enter the following login information when prompted:
User ID:
o
Password: admin
o
§
After setting the configurations, with the SD Card inserted access the setup menu.
Navigate to Setup>Maintenance>Storage to format the SD card. Please note, non-
Gatekeeper branded card may not function reliably. If used, non-Gatekeeper
branded SD cards must be formatted in the DVR prior to use.
§
Start vehicle, and wait for recorder to boot up (approximately two minutes). Confirm
live camera video is visible on monitor (small Green camera in each camera image –
indicates the DVR is recording).
§
Confirm DVR is recording by observing the LED's as per the following table
§
To access the SD Card, turn the key to the unlocked position, open the SD card door,
wait for the LEDs to turn off and press the SD card in to release.
PWR (Power)
USB (If USB Drive
Connected)
ALM (Alarm)
REC (Recording)
ERR (Hardware Error)
NET (If a network is
connected)
CABLING DIAGRAM
→
Setup / Config
admin
Record Mode
LED
Color
Blue
Blue
Red
Green
Red
Green
Safe to SD Card Mode
Flashing
LED
Status
Constant On
PWR (Power)
On
USB (If USB
Drive
Connected)
Off
ALM (Alarm)
Constant On
REC (Recording)
Off
ERR (Hardware
Error)
Constant On
NET (If a
network is
connected)
- Page 2 -
Y35
QUICK INSTALL GUIDE
v2
Color
Flashing
Status
Blue
Off
Blue
Off
Red
Off
Green
Off
Red
Off
Green
Off
Advertisement
