Related Manuals for Yitong Technology YTMC-51N2-M3
Summary of Contents for Yitong Technology YTMC-51N2-M3
- Page 1 Coaxial-to-Ethernet Conversion Kit YTMC-51N2-M3 MoCA 2.5 Adapter Model#YTMC-51N2-M3 User Guide...
-
Page 2: Table Of Contents
Table of Contents Table of Contents Getting Started Introduction Package Contents Requirements Features Connecting the Adapters Connecting the First Adapter Connecting Additional Adapters Web Management Specifications Notices Warranty Important Safety Instructions FCC Class B Equipment Technical Support... -
Page 3: Table Of Contents
YTMC-51N2-M3 MoCA 2.5 Adapter Getting Started Introduction Congratulations for purchasing the YTMC-51N2-M3 MoCA 2.5 Adapter. The Adapter is a simple, flexible solution for extending a home network. By leveraging the ubiquity of coaxial cabling within the modern home, the Adapter provides an Ethernet Internet port anywhere a coaxial connection is available. -
Page 4: Features
YTMC-51N2-M3 MoCA 2.5 Adapter Features • Ethernet port (gigabit) • MoCA (Coax In) coaxial port • TV (TV/STB Out) coaxial port • Power, MoCA, System and Ethernet LEDs: - Power LED: glows solid green when Adapter is powered up. - MoCA LED: glows solid green with connection on the MoCA port. - Page 5 YTMC-51N2-M3 MoCA 2.5 Adapter 3. Connect another coaxial cable into the coaxial wall port left unconnected in step 1. 4. Connect the other end of the coaxial cable installed in step 3 to the MoCA coaxial port on the side of the Adapter 5.
- Page 6 YTMC-51N2-M3 MoCA 2.5 Adapter of the Adapter. 7. Plug the provided power adapter into the Power port on the side of the Adapter. 8. Plug the other end of the power adapter (external) into an electrical outlet. When complete, the setup should look similar to the figure below:...
-
Page 7: Connecting Additional Adapters
YTMC-51N2-M3 MoCA 2.5 Adapter Connecting Additional Adapters If necessary, additional Adapter scan be placed at locations around the home or office that need an Ethernet Internet connection, but currently only have a coaxial port. To connect additional Adapters: 1. Find a coaxial wall port near the desired location and unplug the coaxial cable connected to the TV or set-top box. - Page 8 YTMC-51N2-M3 MoCA 2.5 Adapter When complete, the setup should look similar to the figure below: The device connected to the Ethernet port is now connected to the Internet via the coaxial network. Repeat this process to install additional Adapters through out the...
-
Page 9: Web Management
YTMC-51N2-M3 MoCA 2.5 Adapter Web Management Each adapter has a web interface for management. You can visit the website to inquire, manage and upgrade. The default IP address of the adapter is 192.168.144.200. To connect to a given adapter, make sure the IP address of your computer is 192.168.144.x (1-254 except 200) and connect provided Ethernet cable between your computer and LAN port of the adapter. -
Page 10: Specifications
YTMC-51N2-M3 MoCA 2.5 Adapter Specifications Model Number YTMC-51N2-M3 LAN MoCA (v. 2.5; up to 2.5 Gbps throughput) LAN Ethernet Port 10/100/1000 (2) LAN Connections MoCA Frequency Range - Extended D-band: 1125MHz~1675MHz TV Frequency Range - 5MHz~1002MHz LED Indicators Power, MoCA, System, LAN1, LAN2 Power External, 5VDC, 1A, 1.3 mm diameter connector plug... -
Page 11: Notices
YTMC-51N2-M3 MoCA 2.5 Adapter Notices Warranty This product has a one-year Limited Hardware Warranty and 120-day free software updates from date of purchase. Local Law This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from state to state in the United States, from province to province in Canada, and from country to country elsewhere in the world. -
Page 12: Fcc Class B Equipment
YTMC-51N2-M3 MoCA 2.5 Adapter Coaxial Cable If applicable, the coaxial cable screen shield needs to be connected to the Earth at the building entrance per ANSI/NFPA70, the National Electrical Code (NEC), in particular Section 820.93, “Grounding of Outer Conductive Shield of a Coaxial Cable, ”... -
Page 13: Technical Support
YTMC-51N2-M3 MoCA 2.5 Adapter Technical Support Reset and Factory Reset To reset the device, press the reset button available under YTMC-51N2-M3. To reset the device into factory default settings, press the reset button available under YTMC-51N2-M3 for 10 seconds. The MoCA status LED is not lit after installing 2 adapters: This indicates that no coax network has been formed.