Solon Essentials AL00038 Quick Start Manual

SQUEEZE ALARM
Squeeze Activated Alarm with Torch

Introduction

The Essentials Squeeze Alarm is a squeeze activated alarm that has a built in LED torch, that is ac-
tivated when pressed. The compact alarm is activated by a simple squeeze operation that allows
the alarm to be activated in one quick touch.

Operation

Before operating the Essentials Squeeze Alarm for the first time please remove the plastic tab
covering the batteries by gently pulling it.
1. To operate the alarm, simply press both sides of the unit at the same time. You do not have
to continue to press the sides; once activated, the alarm will continue to sound until turned
off.
2. To turn the alarm off, press the button on the front of the unit.
3. To turn on the LED light, press the button on the front of the unit. Release the button to turn
the light off.
Users can attach a key ring (not supplied) to the bottom of the alarm, allowing it to be always to
hand. The alarm also has a metal clip that can be attached to clothing.

Battery installation/replacement

It is recommended that the alarm is tested regularly. If the alarm or light appears weak, the
batteries should be replaced. To replace the batteries, remove the four screws from the back
cover and replace the batteries noting the correct polarity. The unit operates by 3 x LR44
(or equavilent) button batteries.
WARNING
The high output siren fitted to this quality personal alarm may cause ear damage if used at
close range for a prolonged period of time. Keep away from children and pets ears. This
product is designed for use as a deterrent; it does not guarantee protection or personal safety.
solonsecurity.co.uk
Product Code: AL00038