Page 1
User Manual S20D300FY S22D300FY S24D300FL The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00382E-02...
Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Cleaning Securing the Installation Space Precautions for storage Safety Precautions Symbols for safety precautions Electricity and Safety Installation and Safety Operation Correct posture to use the product PREPARATIONS Checking the Contents Checking the Components...
Page 3
Contrast Configuring Contrast Sharpness Configuring Sharpness Game Mode Configuring Game Mode SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale Image Size Changing the Image Size HDMI Black Level (S22D300FY / S24D300FL) Configuring the HDMI Black Level Settings H-Position &...
Page 4
Table Of Contents Fine Adjusting Fine CONFIGURING TINT Configuring Red Green Configuring Green Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma COORDINATING OSD Language Configuring Language Menu H-Position & Menu V-Position Configuring Menu H-Position & Menu V- Position Display Time Configuring Display Time...
Page 5
Initial Screen INSTALLING THE Easy Setting Box SOFTWARE Installing the Software Removing the Software TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the following. Q & A SPECIFICATIONS General...
Page 6
Table Of Contents Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Terminology INDEX Table Of Contents...
The contents of this manual are subject to change without notice to improve quality. 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Page 8
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
Page 9
(10 cm) (10 cm) 3.93 inches (10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center (page 81) if the inside of the monitor needs cleaning. (Service fee will be charged.) Before Using the Product...
Page 10
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.
Page 11
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
Page 12
The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
Page 13
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.
Page 14
SAMSUNG period of time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center (page 81) before installation if you want to install the product at such a place. Operation Warning High voltage runs through the product.
(paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 81).
Page 16
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Page 17
Before Using the Product Do not hold the monitor upside-down or move it by holding the stand. The product may fall and break or cause a personal injury. Do not use humidifiers or stoves around the product. An electric shock or fire may result. Rest your eyes for more than 5 minutes for every 1 hour of product use.
Page 18
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen.
Preparations Checking the Contents 1.1.1 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card User manual (optional) (Not available in some locations)
Preparations Parts 1.2.1 Frontal Button The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S20D300FY Function Key Guide GAME MENU MODE AUTO MENU GAME MODE AU TO...
Page 21
Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Use this button to control the brightness and contrast of the screen. Confirm a menu selection. Press the [ ] button to automatically adjust the screen settings.
Page 22
Game Mode is available. INFORMATION can be viewed. Press to enable or disable Game Mode. The items below are not available if the Game Mode function is enable. SAMSUNG SAMSUNG PICTURE → Contrast, Sharpness, Bright, Upscale MAGIC MAGIC COLOR SETUP&RESET Eco Saving →...
Page 23
Preparations Icons Description Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Provided ports may vary depending on the product. S20D300FY Port Description DC 14V Connects to the DC power adapter.
Page 25
Preparations S22D300FY / S24D300FL Port Description DC 14V Connects to the DC power adapter. HDMI IN Connects to a source device via a HDMI cable. RGB IN Connect to a PC using the D-SUB cable. 1 Preparations...
Preparations Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Preparations 1.3.2 Removing the Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product faces downwards.
The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.
Preparations 1.3.4 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. You can adjust the tilt of your monitor. Hold the lower part of the product and adjust the tilt carefully. 1 Preparations...
Preparations 1.3.5 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. The color and shape of parts may differ from what is shown.
Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. S20D300FY RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
Connecting and Using a Source Device S22D300FY / S24D300FL RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC. Connect the DC power adapter to the product and a power socket. Next, turn on the power switch on the PC.
Connecting and Using a Source Device 2.2.3 Connection Using the HDMI-DVI Cable (S22D300FY / S24D300FL) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC.
Page 34
Connecting and Using a Source Device 2.2.4 Connecting the Power Connecting parts may differ in different products. The exterior may differ depending on the product. Power connection using integrated DC power adapter Connect the DC power adapter to the [DC 14V] port on the back of the product and to the power outlet.
An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
Connecting and Using a Source Device 2.2.6 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. ****x**** **Hz Press [ ] to move to the language you want and press [...
A detailed description of each function is provided. Refer to your product for details. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode.
Page 38
Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode.
Page 39
Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC SAMSUNG...
Page 40
The following screen will appear. PICTURE Optimizes image settings for playing Brightness games. Contrast Sharpness Game Mode SAMSUNG MAGIC Bright Custom Always On SAMSUNG MAGIC Upscale Image Size AUTO Press [ ] to move to the option you want and press [ The selected option will be applied.
Page 41
The functions available on the monitor may vary depending on the model. Refer to the actual product. You can customize the brightness to suit your preferences. 3.5.1 Configuring SAMSUNG MAGIC Bright MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Page 42
Set to an optimum picture quality suitable Brightness for the working environment. Contrast Sharpness Dynamic Game Mode Custom Standard SAMSUNG MAGIC Bright Movie SAMSUNG 2200 MAGIC Upscale Custom Wide Image Size AUTO SAMSUNG When the external input is connected through HDMI and...
Page 43
The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.6.1 Configuring SAMSUNG MAGIC Upscale MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Choose the size and Brightness aspect ratio of the picture displayed on screen. Contrast Sharpness Game Mode SAMSUNG MAGIC Bright Auto SAMSUNG MAGIC Upscale Wide Image Size AUTO Auto: Display the picture according to the aspect ratio of the input source.
Page 45
Screen Setup A digital output device is connected using the HDMI cable. The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.). This can only be set when the external input is connected through HDMI and PC/AV Mode is set to AV.
Screen Setup HDMI Black Level (S22D300FY / S24D300FL) If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality.
Screen Setup H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode only. This menu is only available when Image Size is set to Screen Fit Mode.
Screen Setup 3.10 Coarse Adjust the screen frequency. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.10.1 Adjusting Coarse MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Screen Setup 3.11 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.11.1 Adjusting Fine MENU Press any button on the front of the product to display the Function Key Guide.
Configuring Tint A detailed description of each function is provided. Refer to your product for details. SAMSUNG Adjust the tint of the screen. This menu is not available when Bright is set to Cinema MAGIC Dynamic Contrast mode. This menu is not available when Game Mode is enabled.
Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Configuring Tint Color Tone Adjust the general color tone of the picture. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. SAMSUNG This option is not available when Bright is in Cinema Dynamic Contrast mode. MAGIC This menu is not available when Game Mode is enabled. The functions available on the monitor may vary depending on the model. Refer to the actual product.
Coordinating OSD A detailed description of each function is provided. Refer to your product for details. Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Configuring Language MENU Press any button on the front of the product to display the Function Key Guide.
Coordinating OSD Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Coordinating OSD Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time MENU Press any button on the front of the product to display the Function Key Guide.
Coordinating OSD Transparency Set the transparency for the menu windows. 5.4.1 Changing Transparency MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to MENU SETTINGS and press [...
Setup and Reset A detailed description of each function is provided. Refer to your product for details. Reset All Return all the settings for the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.1.1 Initializing Settings (Reset All) MENU Press any button on the front of the product to display the Function Key Guide.
Setup and Reset Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when Bright is in Dynamic Contrast mode. MAGIC This menu is not available when Game Mode is enabled.
Setup and Reset Off Timer You can set the product to automatically turn off. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.3.1 Configuring Off Timer MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Setup and Reset 6.3.2 Configuring Turn Off After MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. Press [ ] to move to SETUP&RESET and press [ ] on the product.
Setup and Reset PC/AV Mode (S22D300FY / S24D300FL) PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to HDMI) is in power saving mode or is displaying the message Check Signal Cable, press the MENU button to display the On Screen Display(OSD).
Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.5.1 Configuring Key Repeat Time MENU Press any button on the front of the product to display the Function Key Guide.
Setup and Reset Source Detection (S22D300FY / S24D300FL) You can activate Source Detection. The functions available on the monitor may vary depending on the model. Refer to the actual product. 6.6.1 Configuring Source Detection MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
INFORMATION Menu and Others A detailed description of each function is provided. Refer to your product for details. INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION MENU Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen.
Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness, Contrast using the [ ] buttons when the initial screen (that displays no menu screen) is displayed. Brightness SAMSUNG This menu is not available when Bright is set to Dynamic Contrast mode. MAGIC...
Installing the Software Easy Setting Box Easy Setting Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software Insert the installation CD into the CD-ROM drive. Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "Easy Setting Box"...
Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button. 8 Installing the Software...
Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Page 71
Troubleshooting Guide Screen issue Issues Solutions The power LED is off. The screen will not switch Check that the power cable is connected properly. (Refer to "2.2 Connecting and Using a PC") The message Check Signal Cable appears. Check that the cable is properly connected to the product.
Page 72
Troubleshooting Guide Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 9 Troubleshooting Guide...
Page 73
Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Go to Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Display Settings...
Page 74
Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and Themes resolution? Display Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize Display Settings, and adjust the resolution.
Specifications 10.1 General Model Name S20D300FY S22D300FY S24D300FL Panel Size 19.5 Inches (49 cm) 21.5 Inches (54 cm) 23.6 Inches (59 cm) Display area 432 mm (H) x 476.64 mm (H) x 521.28 mm (H) x 239.76 mm (V) 268.11 mm (V) 293.22 mm (V)
Page 76
The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 10 Specifications...
Test Condition (Power Button) Power Indicator Blinking Power Consumption Typical 16 W Typical 0.3 W Less than 0.3 W (S20D300FY) Power Consumption Typical 22 W Typical 0.3 W Less than 0.3 W (S22D300FY) Power Consumption Typical 20 W Typical 0.3 W Less than 0.3 W...
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor. If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT monitor before you exchange it with the LCD monitor. Model Name S20D300FY S22D300FY / S24D300FL Synchronization Horizontal Frequency...
Page 79
Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1024 x 768 60.023 75.029 78.750 VESA, 1152 x 864 67.500 75.000 108.000 MAC, 1152 x 870 68.681 75.062 100.000 VESA, 1280 x 720 45.000 60.000 74.250 VESA, 1280 x 800...
Page 80
Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900RB 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250 VESA, 1920 x 1080...
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) LATIN AMERICA ARGENTINE 0800 333 3733 http://www.samsung.com.ar...
If a product damage is caused by; external impact or drop. use of supplies or separately sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD (On Screen Display) On screen display (OSD) allows you to customize on-screen settings to optimize the picture quality as required. You can change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Page 90
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
Page 91
INFORMATION Brightness Installation Checking the Contents Key Repeat Time Coarse Color Tone Connecting and Using a PC Language Contact SAMSUNG WORLD WIDE Contrast Copyright Off Timer Correct Disposal Correct posture to use the product Parts PC/AV Mode Display Time Q & A...
Page 92
Index Standard Signal Mode Table Terminology Transparency Index...