Advertisement
Quick Links
Advertisement
Related Manuals for Spaceman Delta II
Summary of Contents for Spaceman Delta II
- Page 1 User Manual...
- Page 2 The Delta II requires external power of 9-18V DC, negative center via the 2.1mm jack next to the output jack. The Delta II has a high 1M ohm input impedance and a maximum current draw of 45mA when the effect is engaged. Please contact Spaceman if you are unsure about your DC adapter.
- Page 3 HARMONIC TREMOLO LAG control map...
-
Page 5: Suggested Settings
HARMONIC TREMOLO Suggested Settings On the following pages you’ll find a collection of carefully crafted settings to get your started on your journey. - Page 6 Harmonic Tremolo Suggested Settings Harmonix The quintessential Harmonic Tremolo setting The VOICE is selecting Low-pass and High-pass filter outputs The FREQ knob controls the crossover frequency of the filter outputs...
- Page 7 Harmonic Tremolo Suggested Settings High & Dry...
- Page 8 Harmonic Tremolo Suggested Settings Throbby...
- Page 9 Harmonic Tremolo Suggested Settings Good Vibrations...
- Page 10 Harmonic Tremolo Suggested Settings Phased & Confused...
- Page 11 Traditional Tremolo Suggested Settings Smooth Operator This is a traditional tremolo sound With LAG off, and VOICE in the middle, the tone shaping of the FREQ and RES is effectively minimized...
- Page 12 Traditional Tremolo Suggested Settings Highlighter...
- Page 13 Traditional Tremolo Suggested Settings Sweet & Lowdown...
- Page 14 HARMONIC TREMOLO Alternate Mode Map Apply power with the Footswitch depressed...
- Page 16 19.5mA Engaged Current Draw: 45mA EXP / Control Voltage 0-5V DC TRS Jack - Over / Reverse voltage protected Input Voltage: 9-18V DC, negative center via the 2.1mm jack Please contact Spaceman if you are unsure about your DC adapter.
Need help?
Do you have a question about the Delta II and is the answer not in the manual?
Questions and answers