Page 2
The Aurora requires external power of 9V DC, negative center via the 2.1mm jack. The Aurora has a high 1M ohm input impedance and a maximum current draw of 58mA when the effect is engaged. Please contact Spaceman if you are unsure about your DC adapter.
Page 3
Modulation Bus The Aurora is capable of multiple types of modulation. Here is an in-depth description of the functionality of each mode.
Page 4
Aurora Modulation Bus LFO 1 - Classic Flange/Chorus/Vibrato (triangle waveshape) This works just like traditional flanger pedals. The RANGE control functions like a Manual or Delay time control, the only difference is that it is always active while on most flangers, it is only active when width is not set at max.
Page 5
Aurora Modulation Bus COMB - Comb filter mode (static filtering/no sweep) This emulates a fixed comb filtering effect by utilizing a short non-swept variable delay time. This Haas Effect can thicken and add dimension to your sound. REGEN will make it very metallic and intense.
2.25 inches / 57 mm Weight: 14.6 ounces Input Resistance: 1M Ohm Bypass Current Draw: 24mA Engaged Current Draw: 58mA Input Voltage: 9-12V DC, negative center via the 2.1mm jack Please contact Spaceman if you are unsure about your DC adapter.
Page 7
Aurora Modulation Bus LFO 2 - Flange/Chorus/Vibrato - variable rise & fall times (triangle/ramp up/ramp down waveshape) This works like LFO 1, except you get control over RISE & FALL times separately. The RATE & RANGE controls have an effect on the speed AND waveshape of the modulation.
Need help?
Do you have a question about the Aurora and is the answer not in the manual?
Questions and answers