INTRODUCTION About the manual The manual ensures the safe operation of the devices and must be kept in the devices‘ close proximity, immediately accessible for any personnel. All personnel are to carefully read and understand this manual before taking up work. As a precondition for safe operation, all safety instructions and operational procedures given in this manual must be observed.
Proper Use The devices are solely intended to be used for the inspection of cleaned water and sewer pipes in combination with original accessories and components made by Kummert GmbH. Any other use of the devices considered improper. Target group This manual is addressed to skilled sewer and pipe inspectors or individuals with a comparable, documented qualification.
The delivery is to be inspected for completeness and possible transport damage immediately upon receipt. Report transport damages to the carrier immediately. The standard scope of delivery of K-35 HD includes: • K-35 HD •...
PRODUCT DESCRIPTION Brief description K-35 HD K-35 HD is suitable for pipes of DN50 and up. The flashing LEDs guarantee perfect illumination and crisp, clear images. The 1:1 format is ideal for the mainly circular pipes. The integrated locating transmitter enables the operator to locate the camera at any time during the inspection.
K-35 HD features two inspection modes - the full image mode and the view mode. Push the center of the 3D joystick. TIP The software can3D assits you with operating K-35 HD. For more detailed ® information read the manual can3D ®...
Please contact our service team in case of any malfunction as well as for requests for repair, spare part orders or any further question: Phone: +49 (0) 9382 9727 - 710 E-Mail: service@kummert.de CLEANING Seal the connector with the supplied protective cap and clean the camera under running water. NOTE Property damage due to incorrect cleaning! Incorrect cleaning may cause damage or total breakdown.
MAINTENANCE For a smooth and safe operation, it is necessary to visually check and regularly clean the device. The following maintenance guide explains the needed maintenance tasks: Check if all seals are present and intact Check if all screws are present and tight Make sure that all connectors are clean and dry Make sure that the sapphire glas is not damaged Make sure that the end piece is not damaged...
DISPOSAL NOTE Danger to environment! Incorrect disposal may cause dangers to the environment. • Electrical waste, electronic components, lubricants and other substances may only be disposed of by certified specialist companies. • When in doubt, ask for information on environmentally safe disposal at your local authorities or specific waste management companies.
Page 13
Albert-Einstein-Str. 8 D - 97447 Gerolzhofen Tel. +49 (0) 9382 9727 - 0 info@kummert.de www.kummert.de Vertrieb durch Distributor...
Need help?
Do you have a question about the K-35 HD and is the answer not in the manual?
Questions and answers