Recharging Battery; Operating; Empty Dust Bin And Maintenance - Mami Robot PPORO User Manual

Recharging Battery

1. Locate charging station in an even surface and stand
it against the wall, and insert adapt terminal into the
K7 charging station.
2. After inserting adapt terminal into the K7 charging
station, plug the power cord in the power socket.
3. After checking whether power is turned off, locate
Zaaloo on recharge holder.
4. Indicator's color turns to red while Zaaloo is charg-
ing. After recharging, it will be changed color as blue.
Recharging will be finished in 2 hours.
5. Green light blinks when charging is completed.

Operating

1. Separate Zaaloo from Charging Station after charging is completed
2. Turn the power on by pushing up the power button.
3. You can adjust suction power with the power button.
4. Turn the power off by pushing down the power button.

Empty Dust Bin and Maintenance

1. Press button and pull to separate dust bin as shown on the picture.
2. Empty dust bin and rinse it with water, and dry dust bin at good ventilation.
3. Combine filter compartment with dust bin, and install it in main body with closing dust bin cover until it "clicks" into place.
* Empty and clean the dust bin regularly. Do not rinse main body with water.
24