Table of Contents
Troubleshooting
Related Manuals for Mami Robot PPORO
Summary of Contents for Mami Robot PPORO
- Page 1 Free Your Life With Innovative Technology PPORO User’s Guide Please read this manual before using the product. Please keep this manual in your sight. Please visit www.mamirobot.com for more information.
- Page 3 This product specially designed for the US home use. Please check if the machine works properly several times before you clean the floor. Please check the status of the machine when you use it for the first time. Please stop operating the machine if you see any scratches. We are not responsible for the problems if you did not check the circumstance listed above.
- Page 4 Thank you for purchase Mamirobot. Mamirobot vacuum cleaner which is made by patents of Mamirobot leads you to new world. The Mamirobot of remarkable cleaning ability is ... 1. Mamirobot is designed for efficient cleaning the regular floor and carpet(less than 1cm).
-
Page 5: Table Of Contents
Contents Important Safety Information Before using Check List Before Operation Know-how for Using Components Name of Part Characteristic of Battery Preparing Battery Installation Station Installation (K5, K7) Recharging Battery using Station (K5, K7) Recharging Battery using Adapter (K5,K7) Empty Dust Bin and Replace Filter Install Dust Cloth Side Brush Maintenance Main Brush Maintenance... -
Page 6: Before Using
Safety Information Before using Mamirobot, read all safety precautions and keep these in mind to reduce the risk of accident or damage. Mamirobot is for indoor use only. Do not use outdoors or on wet surfaces. It may cause failure. Before using, put away any obstacles which interrupt Mamirobot movement on the floor. -
Page 7: Know-How For Using
Before Use Prepare for Cleaning Before using, put away any obstacles which interrupt Mamirobot movement on the floor. Obstacles could be clothes, papers, power cord, etc.. Make sure if there is any small object on the bottom panel before use. Anti-Falling Sensor Sensors of Mamirobot can recognize the depth between current area and next area. -
Page 8: Components
Components Unpack the product and check that all of the following contents are included. Main Components Hand Vacuum ( for K7 ) Mamirobot cleaner Remote Controller Battery Charge Station (for K5, K7) Parts/Small components Main Brush Cover Main Brush Hair Mode Cover ※One of these covers is installed in the main body. -
Page 9: Name Of Part
Name of Part Front Sensor Bumper Rubber Bumper Remote Control Sensor Display Window Status Indicator Operating Buttons Dust Bin Cover Button Dust Bin Cover Anti Falling Sensor Recharge Plate Front Wheels Rear Wheel Side Brush... -
Page 10: Battery Installation
About Battery 1. Mamirobot’s adapter is free voltage type (100 ~240V), so you can use it in any country without limitation of voltage. With a full- recharge, the battery lasts maximum 2 hours. (Working time can be various by types of floor and cleaning mode.) 2. -
Page 11: Station Installation (K5, K7)
Charging Station Installation (K5, K7) 1. Locate charging station in an even surface and stand it against the wall as shown in Figure. For the auto-recharging, make sure there is no obstacle within 1.5m radius. 2. After inserting adapt terminal into the charging station, plug the power cord in the power socket. Recharge Using Charging Station (K5, K7) CHARGING... -
Page 12: Empty Dust Bin And Replace Filter
Empty Dust Bin and Replace Dust Filter 1. Press dust bin cover release and pull to remove bin. You can empty and clean dust bin easily. 2. For restraining the propagating of germs, clean dust bin with a pH-neutral detergent and rinse it with water. 3. -
Page 13: Install Dust Cloth
Mop Installation 1. Place Mamirobot upside down on a flat floor (Use soft cloth to prevent dent or scratch). 2. Pull the attachment plate from its original location to the holder until it “clicks” into place as shown in Figure. If you misplace the plate, cleaning efficiency and working time can be influenced by friction between machine and floor. -
Page 14: Main Brush Maintenance
Maintenance Main Brush For maintaining of cleaning ability, check and clean the main brush regularly. 1. Separate the main brush cover by pressing the cover releaser as shown in Figure. 2. After lifting the stator part (black cube) up, separate the rotor part from the main body. -
Page 15: Cleaning
Composition and Name of Display Panel LOW NOISE CLEANING CHARGING SCHEDULE Status Display Quiet Mode Indicator Charging Indicator Cleaning Time Indicator Schedule Time Indicator Auto-Recharge Button Main Power Button Cleaning Time Control Button Light Sensor Status Display Auto Recharge Button (K5, K7) -
Page 16: Remote Controller
Remote Controller 1. Lift the battery cover at the back of the remote control, and install the batteries into the remote control with the right polarity as shown in figure. Close it until it clicks into place. 2. For using remote control, press the main power button on the Mamirobot to stand by. 3. -
Page 17: Operating Mamirobot
Operating Mamirobot CLEANING 1. Press the Main Power Button on the main body. Mamirobot is turned on and becomes standby status. 2. In stand-by status, Mamirobot start cleaning with pressing the Main Power Button or Start/Stop Button on the remote control. Default cleaning time is 1 hour. -
Page 18: Normal Mode
Regular Cleaning Mode 1. Mamirobot uses the six steps for cleaning the area. ① Random Moving → ② Spiraling → ③ Random Moving → ④ Wall Following → ⑤ Random Moving → ⑥ Grid Moving → Cleaning will be operated by repeating those 6 steps (each steps takes about 2 minutes 2. -
Page 19: Auto Recharging (K5, K7)
Auto Recharge Function (K5, K7) CHARGING 1. When you press Auto-Recharge Button on main body or on the remote control, Mamirobot stops it’s work and returns to the charging station to recharge its battery. 2. During the cleaning, Mamirobot checks residual battery power. Before the residual battery power runs out, the machine goes for recharging to the charging station automatically. -
Page 20: Voice Guidance
Voice Guidance Mamirobot guides you with voice for more convenient using. Hello, I am Mamirobot When power is turned on. Start Charging When Mamirobot start recharging at the charging station or it is recharged by adapter. Half an hour, One hour, Continue When Cleaning Time Control Button is pressed. -
Page 21: Troubleshooting Error Code
Troubleshooting for Error Codes (Status Display) Error Code Cause and Solution Low Battery Error code is shown when the battery runs out or Mamirobot fails in approaching to the charging station. In this case, recharge it manually. Trouble with Bumper or Anti Falling Sensor Error code is shown when the bumper is pressed or a mistaken recognition of anti-falling sensor. -
Page 22: Hand Cleaner Zaaloo
Hand Held Cleaner Zaaloo (K7) Power Button · With this button, you can turn it on/off and adjust suction power. Dust Bin Release Button · With this release, you can remove dust bin. Dust Bin · Dust bin can be separated with main body and can be washed with water. -
Page 23: Part Name
‘Connector for Vehicle is for vehicle use only. It is not included with House use Hand Held Cleaner or Pporo. ‘ Recharge Station is included with K5 and K7 model. * ‘ Adapter’ is included with House use Hand Held Cleaner and PPoro. It is not included with Vehicle use Hand Held Cleaner. -
Page 24: Recharging Battery
Recharging Battery 1. Locate charging station in an even surface and stand it against the wall, and insert adapt terminal into the K7 charging station. 2. After inserting adapt terminal into the K7 charging station, plug the power cord in the power socket. 3. -
Page 25: Replace Filter
Replace Dust Filter How to replace the filter How to replace main body filter 1. Remove dirty dust filter from dust bin, install the new 1. Remove dirty dust filter from main body, install the new dust bin filter in the center of dust bin filter frame as dust bin filter in between main body filter frame and shown in figure. -
Page 26: Specification
When the machine moves slowly · Remove the foreign substance from wheels and stators of wheel. Specification Product Name Mamirobot Vacuum Cleaner Model Pporo K3, K5, K7 Battery Ni-MH 3500mAh, 14.4V Size 14inches (Diameter), 3.5inches (Height) Weight 6.2 Lb (Include Battery) - Page 32 Free Your Life With Innovative Technology PPORO * 출력 및 인쇄제작 금지 법인 주소지 / 연락처 확인 후 수정 필요 Mamirobot USA Corporation 111 S.Weber Dr. Ste.1 Chandler, AZ 85226 USA www.mamirobotusa.com Tel : +48(0)-705-6264...
Need help?
Do you have a question about the PPORO and is the answer not in the manual?
Questions and answers