Table of Contents
Advertisement
6.1 Information for test insti-
tute
Test institutes can request the condi-
tions for comparison tests, e.g. ac-
cording to AS/NZS2007, by sending
an e-mail to dishwasher@test-appli-
ances.com.
These are the conditions for conduct-
ing the tests, however not the results
or consumption values.
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.
Open ajar using a block of approxim-
ately 100 mm upon completion of
dry test.
6.2 Favourite
You can save a combination of a pro-
gramme and an additional function to
the
button.
You can save the program via the
Home Connect app or on the appli-
ance.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.
When programmes have been down-
loaded and on delivery of the appli-
ance, the name of the programme
will be displayed in the app. The dis-
play alternately shows "AP:P" and the
remaining running time.
Tip: You can use the Home Connect
app to download additional pro-
grammes and save them to the
1
button.
Save Favourite
appliance.
Press
.
1.
1
Depending on the appliance specifications
on the
Additional functions aus
Press the right programme button.
2.
Press the button for the relevant
3.
additional function.
→ "Additional functions", Page 21
Press
for 3 seconds.
4.
a The selected programme and the
additional function will flash.
flashes.
a
a The programme and the additional
function are saved.
Tip: To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→ "Overview of basic settings",
Page 36
7 Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
panel of your appliance, are available
depending on the appliance configur-
ation.
Additional
function
SpeedPerfect
Use
¡ The run time is
shortened by 15%
to 75% depending
on the rinse pro-
gramme.
¡ The additional
function can be
activated before
the start of the
programme and at
any time when the
programme is run-
ning.
21
Advertisement
Table of Contents
