THE WEEMS & PLATH COMPANY STORY In May of 1919, eight years before Lindbergh’s famous solo flight, three small planes set out from Naval Air Station Rockaway, NY headed for Plymouth, INSTRUCTION MANUAL England in an attempt to make the first trans-Atlantic flight. Only one of them made it.
Page 3
(which can occur when you enter or exit a heated area on a cold day), may result in Thank you for purchasing the Electronic Marine Barometer #4003. This instrument is designed specifically for the mariner. It is a professional quality the creation of condensation inside the device.
OPERATING INSTRUCTIONS NAVIGATION BUTTON OVERVIEW (orange) Button • Pressure Alarm - hold 1 second • Alarm Clock – hold 1 sec Ports: • Settings – hold 1 sec • Exit 1. Top - Speaker Out G (“Return”)Button (non-functioning) • Allows viewer to review specific data points in pressure chart history •...
UPPER SCREEN INITIAL SETUP Upper Screen ICON Descriptions Alternating Power Icon Alarm Clock POWER – animated phasing moon; Time & Date pauses for 25 seconds to display the current phase of the moon. When the icon is animated, it indicates the unit is Upper LCD Screen powered on and working.
CONFIGURING SETTINGS Pressure Altitude Temperature To access the system settings, press and hold the orange M button until the main Meter °C menu appears on the lower screen. Then use the ▼ button to move the cursor to InHg Feet °F “settings”...
ADVANCED FUNCTIONS CONFIGURATION Buzzer – found in the “SETTINGS” menu, “buzzer” allows you to set the volume levels of the alarms and button “beeps.” There are 4 settings for each – BUTTON: 0, 1, 2, 3. When “beep vol.” is set to 0 the buzzer is turned off and you will not hear “beeps”...
WARRANTY ZOOM FUNCTION: This function allows you to zoom in on the chart history screen to see pressure movement in 2, 4, 6, 12, 24 and 48 hour increments. Adjust the zoom increments Your Electronic Marine Barometer is warranted against defects for two years. Any by pressing the ▲...
Need help?
Do you have a question about the 4003 and is the answer not in the manual?
Questions and answers