Indicators - ZLG CANFDBridge Smart User Manual

CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
Type Schematic Diagram
DB9 socket
DB9 socket

2.4 Indicators

CANFDBridge has four red and green bi-color LEDs to indicate its operating status.
Table 2.3 lists the functions.
Indicator
SYS indicator
USB indicator light
Table 2.2 CAN interface definitions
Pin definitions
1: NC
2: CAN_L
3, 6: CAN_GND
4, 8: NC
5: Shield
7: CAN_H
9: NC
1: NC
2: CAN_L
3, 6: CAN_GND
4, 8: NC
5: Shield
7: CAN_H
9: NC
Table 2.3 LED indicators
STATUS
Green
Off
Green flashing
Off
Always red
Green normally on The USB driver has been installed, and the USB
Green flashing
Flash in red
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
5
Pin description
Dangling
CAN data transceiving
differential inverted signal
CAN isolated ground
Dangling
Shielding ground
CAN data sending and
receiving differential
positive phase signal
Dangling
Dangling
CAN data transceiving
differential inverted signal
CAN isolated ground
Dangling
Shielding ground
CAN data sending and
receiving differential
positive phase signal
Dangling
Indication status
Power on equipment
The device is not powered on
Device running
USB cable not connected
USB cable connected but driver not installed
cable has been connected
The USB is communicating with the device
USB and device communication error
User Manual