Beko BDFN36640CX User Manual page 36

EverClean Function Disabled/Enabled
IonGuard Function Disabled/Enabled
Automatic Liquid/Gel Detergent function
Disabled/Enabled
Interior Lighting
(Depends on the Model)
Suitable models are equipped with a light
that illuminates the interior of your machine
when the door is opened.
1. When the door is closed, after
turning on your machine with the On/
Off button, enter the Sub-Menu by
pressing the On-Off and P2 program
buttons simultaneously for 3 seconds.
2. Press P2 program button, and go to the
"L:" position on the display. Select the
desired position with the P3 program
button. At "L:0" position, the interior
illumination feature is off and it is on at
"L:1" position.
3. Exit the settings menu by pressing the
On/Off button for 3 seconds to save
this setting. Your settings will be saved
automatically.
36/EN
EverClean Function
(depends on the model)
When you activate this function, your micro-
filter is cleaned with a special system at the
end of the washing cycle and is ready for
the next use. With this cleaning process,
the cleaning period of the micro-filter can
be increased from 2 weeks to 3 months
and the washing performance is improved.
In order to use this function effectively, it is
recommended to use it in every washing
cycle.
There are two options for this function,
"Enabled" and "Disabled".
To change the filter cleaning setting:
1. When the door is closed, after
turning on your machine with the On/
Off button, enter the Sub-Menu by
pressing the On-Off and P2 program
buttons simultaneously for 3 seconds.
2. Press the P2 program button, and go to
the "F:" position on the display. At the
same time, the filter cleaning function
indicator is activated on the display.
3. Select "F:0" or "F:1" position using
the P3 button. Filter cleaning function
is enabled at "F: 1" position, and is
disabled at "F: 0" position.
4. Exit the settings menu by pressing
the On/Off button for 3 seconds. Your
settings will be saved automatically.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.