Download Print this page

Alesis CoolFire 15 Service Manual page 11

Hide thumbs Also See for CoolFire 15:

Advertisement

16. Rotate EFFECT knob one click to the right (so the
indicator points to "LO").
17. Rotate EFFECT knob one click to the right (so the
indicator points to "LO MID").
18. Rotate EFFECT knob one click to the right (so the
indicator points to "HI MID").
19. Rotate EFFECT knob one click to the right (so the
indicator points to "HIGH").
20. Rotate EFFECT knob one click to the right (so the
indicator points to "EDGE").
21. Rotate EFFECT knob one click to the right (so the
indicator points to "HUM CANCEL").
22. Rotate EFFECT knob one click to the right (so the
indicator points to "NOISE GATE").
23. Rotate EFFECT knob one click to the right (so the
indicator points to "FX1").
24. Rotate EFFECT knob one click to the right (so the
indicator points to "PARAM").
25. Rotate EFFECT knob one click to the right (so the
indicator points to "FX2").
26. Rotate EFFECT knob one click to the right (so the
indicator points to "PARAM").
27. Rotate EFFECT knob one click to the right (so the
indicator points to "LEVEL").
To restore factory preset.
1. Hold down VALUE knob, and turn on power, verify that display flashes 'AL'
2. Press and release VALUE knob, verify that ' AL' flashes rapidly a few times, then continues flashing at the
previous rate.
3. Rotate EFFECT knob so that the indicator points to COMP/LIMIT, verify that display shows 'C2'
4. Rotate EFFECT knob so that the indicator points to PLAY, verify that display shows 'A0'.
5. Rotate VOLUME knob to minimum.
6. DONE!
Verify that display shows 'S4' and does not flicker
Verify that display shows 'S5' and does not flicker
Verify that display shows 'S6' and does not flicker
Verify that display shows 'S7' and does not flicker
Verify that display shows 'S8' and does not flicker
Verify that display shows 'S9' and does not flicker
Verify that display shows 'SA' and does not flicker
Verify that display shows 'Sb' and does not flicker
Verify that display shows 'SC' and does not flicker
Verify that display shows 'Sd' and does not flicker
Verify that display shows 'SE' and does not flicker.
Verify that display shows 'SF' and does not flicker

Advertisement

loading

This manual is also suitable for:

Ga6