Related Manuals for Anova MB300
Summary of Contents for Anova MB300
- Page 1 Instructions and user manual MB300 Millasur, SL. Rúa Eduardo Pondal, nº 23 - Pol. Ind. Sigüeiro 15688 - Oroso - A Coruña 981 696465 www.millasur.com...
-
Page 2: Information About This Manual
ANOVA wishes to congratulate you for choosing one of our products and guarantees the assistance and cooperation that has always distinguished our brand over time. This machine is designed to last for many years and to be of great use if used in accordance with the instructions contained in the user manual. - Page 3 INDEX 1. BASIC SAFETY INDICATIONS 2. PRECAUTIONS FOR USE 3. TECHNICAL SPECIFICATIONS 4. PARTS OF THE MACHINE 5. AREAS OF APPLICATION 6. INSTRUCTIONS FOR CHAIN INSTALLATION 7. CHAIN MAINTENANCE 8. ENVIRONMENT 9. EXPLODING 10. EC DECLARATION OF CONFORMITY...
- Page 4 1. BASIC SAFETY INDICATIONS Read all safety warnings and all instructions. Failure to warnings and instructions may cause electric shock, fire and/or serious injuries. Note: Save all warnings and instructions for future reference. Note 2: Power tools are understood as both tools that are connected directly to the current and those that work through battery.
- Page 5 19. To the connect the power, pay attention to whether the voltage of the power supply is the same as that of the nameplate. When the voltage of the power supply is higher than the applicable voltage of the tool, it is easy to damage the tool and cause damage to the tool.
-
Page 6: Precautions For Use
33. After the installation is complete, first turn on the machine without load and observe that the machine works normally. 34. It is not advisable to cut too hard, according to the actual cutting situation, small first, then large. 3. TECHNICAL SPECIFICATIONS MODEL MB300 Voltage No load speed 4600r/min Bar size 4"... -
Page 7: Areas Of Application
5. AREAS OF APPLICATION cut bamboo Tree Trimming Chopping firewood Pruning fruit trees 6. INSTRUCTIONS FOR CHAIN INSTALLATION STEP 1: Install the bar and chain on the sprocket and adjust the chain to the • proper position. STEP 2: Close the sword cover and install the screws. •... - Page 8 When filing the chain, be careful not to touch the cutter tooth when pushing the file in • the direction indicated by the arrow. When the chain has already been sharpened 2-3 times, the upper tooth guide may • also need to be lightly filed. This is because the guide is used to measure the depth of cut.
- Page 9 9. EXPLODING MB300...
-
Page 10: Ec Declaration Of Conformity
In the event that the machine is modified and this modification is not approved by the manufacturer and communicated to the distributor, this declaration will lose its value and validity. Machine name: BATTERY CHAINSAW MB300 Model: Recognized and approved standard to which it conforms: directive2006/42/EC...
Need help?
Do you have a question about the MB300 and is the answer not in the manual?
Questions and answers