Summary of Contents for Studymate EINSTEIN SMEINSBL
Page 1
ASSEMBLY INSTRUCTIONS EINSTEIN LEARN AND GROW CHAIR SMEINSBL / SMEINSPU Weight capacity: 80kgs This design and instruction booklet is subject to copyright. 1 CTN www.officeworks.com.au For spare parts or hardware call :(03)93103011 or email:Hardware@kyvas.com.au...
Page 2
20min (03) 9310 3011 NOTE • Please check you have all hardware before assembly. • If you are missing any hardware, please contact Kyvas on (03) 9310 3011 or email hardware@kyvas.com.au • Please ensure you have the name of the item, required hardware part and quantity. •...
Page 4
PUSH 4PCS 4PCS (M6x16mm) Do not tighten screws fully until you have completed assembly...
Page 5
2 PCS 2 PCS (M6x10mm) 2PCS 2PCS (M6x25mm) Note: Attach Backbar to the assembled Seat Cushion (B) using 2 x screw (H) and 2 x screw (J) with Allen Key (K). Tighten the screws. Do not tighten screws fully until you have completed assembly Screw L into seat plate...
Page 6
Your Einstein Learn and Grow Chair is now complete and ready for use IMPORTANT NOTE: Periodically check and re-tighten screws.
Page 7
Care Instructions - fabric chair Spot clean fabric with upholstery shampoo or dry cleaning powder only. Do not saturate fabric. Apply proprietary cleaning products strictly according to instructions. Wipe dry immediately with an absorbent dry cloth. Treat spills on fabric material immediately with an absorbent cloth by blotting the spill. Do not use detergents, solvents or abrasive cleaners.
Page 8
EINSTEIN LEARN AND GROW CHAIR Functionality Chair Height Adjustment - To increase chair height pull lever upward while lifting body weight slightly off the seat. - Release lever at desired height. - To lower chair height sit fully into the chair and pull lever upward. - Release lever at desired height.
Need help?
Do you have a question about the EINSTEIN SMEINSBL and is the answer not in the manual?
Questions and answers