Page 3
Tools Required CAUTION: Do not use tools other than those required, as this can damage your new item NOTE Please check you have all hardware before assembling. If you are missing any hardware, please contact 1300 OFFICE (1300 633 423). Please ensure you have the name of the item, required hardware part and quantity.
Safety and Warnings •This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table. •Please read the operation manual prior to start using the table. It provides you with important information about safety, use, installation and maintenance of the table, and thus protecting you and your children and avoiding damage on the table.
Page 8
Step 1 Install the feet E(5x5) Step 2 Install left and right support plates D(3x3) 8 / 14...
Page 9
Step 3 Install desktop, control panel and adapter bracket Note: The screws must be tightened. Ensure part 7 sits under the beam before assemble desktop 9 / 14...
Page 10
Step 4 Install the protective cover and lids Before After 10 / 14...
Page 11
Step 5 Connect each cable to the adapter Ⅱ Ⅱ Ⅲ Ⅰ Ⅲ Ⅰ 11 / 14...
Page 13
How to use control panel Adjust the desk upwards Adjust the desk downwards ● Button Lift Function Press the“▲”or“▼" button to adjust the height of the desk. ● Reset Function (1) When the lifting system fails, release the button, long press the "▼" button, the reset will be finished until the lift system rebound and stop after reaching the bottom.
Page 14
Warranty 3 years Product Warranty – valid for Australian customers only Officeworks Ltd warrants that this product will be free from defects and work as intended for 3 years from the date of purchase by the original customer. If the product has any defects or does not work as intended during the Warranty Period, Officeworks will, at its election and at its expense, repair or replace the product.
Need help?
Do you have a question about the KANIXIEWE and is the answer not in the manual?
Questions and answers