Table of Contents
Advertisement
4 - Installation / Use
EN
4.2.1 - Thermostat setting
The thermostat factory-set temperature value is 60°C.
If you wish to change this value, follow the procedure below:
SINGLE-PHASE
• interrupt the power supply.
• Remove the protection cover (4) to reach the thermostat (5) (fig. 3).
• Use a screwdriver to turn the thermostat knob and set the desired temperature value (fig.4).
• Refit the protection cover (4).
• Restore the power supply.
FIG.3
4
5
THREE-PHASE
FIG.5
The thermostat regulates the water temperature only when operating with electric element.
8
INSTALLATION AND USER'S MANUAL - QUICK BK Series WATER HEATER - REV000A
FIG.4
TEMPERATURE
SETTING KNOB
AC
NETWORK
NEUTRAL
Turn the thermostat knob and set the desired value.
(fig.5)
BK2
RESET
BUTTON
AC
NETWORK
LIVE
Advertisement
Table of Contents
