Related Manuals for zatech ZMCE 1.1AD
Summary of Contents for zatech ZMCE 1.1AD
- Page 1 ZMCE 1.1AD Overview It is an economical ideal instrument for the basic HFC network. It is rugged, very simple and efficient to use, has a durable plastic shell and protective rubber jacket, and is convenient for one hand operation.
-
Page 2: Shutdown Time
ZMCE 1.1AD Quick Guide Charge the meter Attach the connectors between the charger and the AC current. While the meter is charging, the charger indicator light is red. There is also an indicator on the power adaptor. On completion of charge, the indicator light on the power adaptor will turn green. -
Page 3: Channel Plan
ZMCE 1.1AD CHANNEL PLAN Up to 8 channel plans can be preset, select your desired channel plan. EDIT PLAN Using arrow button select a channel, press F3 to edit. You can set the parameters of all channels of selected channel plan. - Page 4 ZMCE 1.1AD COLOR Select your favorite style of menus, includes below colors: Green/white; white/black; blue/yellow INIT ALL This allow you to initialize your unit to factory default, all your settings will be lost after initializing. Using F1 , F2 select an action and press F3 to confirm.
-
Page 5: Start To Use
ZMCE 1.1AD START TO USE Digital channel signal measurement In the main menu, select the LEVEL icon and press to enter channel measurement mode. The same way you can select other icons or directly press other numbers to enter other measurement modes. - Page 6 ZMCE 1.1AD Like entering digital channel measurement mode, the same way you can enter analog channel, or press to toggle to analog channel from digital channel. F1 Enter V/A measurement menu F4 Enter “Next screen V/A measurement In analog channel measurement mode, Press F1 to enter V/A measurement menu.
- Page 7 ZMCE 1.1AD AUTO In the Auto measurement mode, press F1 to refresh the test result. Press F3 to enter the setup menu. Using F1, F2 select a channel, Using F3 select or deselect it, finally press F4 to save TILT In the TILT measurement mode, using F1 or F2 select a channel.
- Page 8 ZMCE 1.1AD In this mode, the input signal level must be over 70dBuV and available for analog channel only. Using F1 refresh the result. Using F2 or F3 change channel. Directly input channel number and press F4 to enter desired channel.