Advertisement
Quick Links
ZMCBR-H65
General introduction
Preface
Please read this manual carefully before using your Digital Satmeter for the first time.
This operating manual will help you in the
• Appropriate,
• Safe
• Favorable
The technical specifications and operating methods included in this manual are
subject to changes without notice. In case of any inquires after a period of usage,
please contact the manufacturer.
+Safety Precaution
Please read the safety instructions carefully before operating the device.
Please follow all warnings and instructions on the equipment and in the operating
manual.
4 Safety of persons
Ensure that nobody can be hurt by falling tools or parts of the sate antenna during
the adjustment and installation of the antenna. For own security, use a rope on
sloping roofs.
4 Attention for adapter
The devise should only be operated with the supplied AC adapter at the mains. Do
not open the meter or the included AC adapter. There is danger of life through
electric shock! Wrong usage of the ports can lead to the destruction of the
measuring device.
4 Proceed carefully with the measuring device:
• Avoid low temperatures (below 0 °C) or to high humidity.
• The TFT display can be damaged by mechanical impacts.
• Avoid excessive input voltages. Please refer to the technical data
4 Do not operate with the device:
• If it has visible damage,
• If there are loose parts in the device,
• If the device was located outdoors or in damp rooms a extended period of time.
4 Main Supply:
Before operating, please check the units operating voltage is 90~240V AC 50/60Hz.
1
Advertisement
Related Manuals for zatech ZMCBR-H65
Summary of Contents for zatech ZMCBR-H65
- Page 1 ZMCBR-H65 General introduction Preface Please read this manual carefully before using your Digital Satmeter for the first time. This operating manual will help you in the • Appropriate, • Safe • Favorable The technical specifications and operating methods included in this manual are subject to changes without notice.
- Page 2 ZMCBR-H65 4 Overload: Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this may result in electric shock. 4 Liquid: The receiver shall not be exposed to dripping or splashing water, and that no objects filled with liquids, such as base, shall be placed on the apparatus.
-
Page 3: Product Overview
ZMCBR-H65 2. Product Overview 4. LOCK light： This light will be on when signal is locked DVB S2/ ISDB-T 5. 13V/18V light: Indicate the 13V/18V 6. Function key： Made of 4 keys, F1 - F4 7. Arrow key and OK key：... - Page 4 ZMCBR-H65 3. Connection with Other Device The following chapter shows you the connections among product, ANT and other equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection.
- Page 5 ZMCBR-H65 4.2.1 TP Search Main Menu-> Satellite -> TP Search Press OK enter the TP search, first, you should select satellite, in this picture, you also can delete, move, and rename the satellite. When you fixed on a satellite, then press OK the following window will appear. Use [p/q] button to move cursor, it’ll show the satellite name, transponder, LNB, 22 KHz,...
- Page 6 ZMCBR-H65 4.2.4 DiSEqC Search Main Menu-> Satellite -> DiSEqC Search Press OK enter the DiSEqC search, in this menu, connect the DiSEqC port, the view will be display the sat which can connect, then you can search the channel by DiSEqC.
- Page 7 ZMCBR-H65 4.3 TERRESTRIAL Main Menu-> TERRESTRIAL Press OK enter the terrestrial model 4.3.1 TP Search Main Menu-> TERRESTRIAL-> TP Search In this menu, you can Delete, Add, Manual Search, Auto Search transponders. - Delete In this menu, when you highlight the channel item,...
- Page 8 ZMCBR-H65 4.3.2 TP IDE Main Menu-> TERRESTRIAL-> TP IDE. In this menu, you can know the exact information about the transponder and you can also Delete, Add, Manual Search, Auto Search transponders . 1. SNR: It will show you the Carrier to Noise Ratio of the transponder you selected.
- Page 9 ZMCBR-H65 4.4 Watch TV Main Menu-> Watch TV Press OK enter the Watch TV menu, in this menu, you can press the F1 button to select any satellite or press the F2 button to enter the Channel/Radio menu, press the up/down key jump to next/previous channel.
- Page 10 ZMCBR-H65 4.5.2 OSD Setup Menu->Settings>OSD Setup 1. Display Mode: Set the HD format between 1080p, 1080i, 720p, 480i, 480p. 2. TV Type: Set the TV Type on PAL/NTSC/Auto state. 3. Screen Mode: Set the display format according to the screen ratio. Select TV screen mode either 4:3 or 16:9 according to the TV type, or press the MODE button of RCU directly.
- Page 11 ZMCBR-H65 4.5.7 System Info Main Menu-> Settings-> System Info In this menu, you can get the information about the STB, such as Model ID, Hardware & Software version, Load version and Date. When you need service from the dealer you need to submit this information in order to get the correct and fast after sales service.
- Page 12 ZMCBR-H65 4. Play mode ØLoop Set the Loop state on Normal, Reverse, Random, Single or Off. ØSlideshow Interval Set the Slide Show Interval from 2S-10S. ØPhoto View Mode Set the Photo View Mode state on Full Screen, 2x2 Thumbnail or 2x3 Thumbnail.
- Page 13 ZMCBR-H65 4.6.2 Wi-Fi Enter Menu->Expansion->WIFI 1. Select the network name of your Wi-Fi access point from the list. 2. Press the OK button, then input the right password. If the Network is connected, it should get the correct IP address and display the “Connected”.
- Page 14 ZMCBR-H65 Ø Start Recording 1) You can press the F4 button then highlight the PVR item and press the OK button to start recording while watching program. Ø Stop Recording 1) You can press the EXIT button or F4 button to stop recording .
-
Page 15: Additional Information
ZMCBR-H65 4.7.4 System Press the system directly jump to setting of main menu. 4.7.5 FIND Press the FIND button to display the signal finding menu, jump to Satellite/Terrestrial identify menu, rest operation same as above 4.8.6 Scan In the S2 model, it is blind scan and fast scan, in the ISDBT model, it is auto search 5. - Page 16 ZMCBR-H65 ISDBT Tuner & Demodulator Frequency Range 177.143 MHZ to 803.143 MHZ F type, female（With embedded F Input Connector connector） RF Impedance 75Ωunbalanced IF Band width 6M, 7M, 8M Demodulation 64QAM,16QAM,QPSK FFT Mode 2K/8K Constellation Auto 1/4, 1/8, 1/16, 1/32...