Sibata QC-10N Operation Manual

Sibata QC-10N Operation Manual

Quick charger

Advertisement

CODE 080860-110
Quick Charger QC-10N Operation Manual
Thank you for buying the QC-10N Quick Charger. Before
using the QC-10N, be sure to thoroughly read this manual to
ensure correct use.
Also, keep this manual in a safe place so that it can be
referred to whenever necessary.
- 1 -
The precautionary information that appears in this manual is
for ensuring that the product is used safely and for
preventing injury to you and other people and damage to
equipment.
It is all important for ensuring safety and so be sure to read
it thoroughly before using the product and observe it during
use.
Warning Indications
DANGER: Impending danger is expected
WARNING: There is an expected risk that
CAUTION: There is an expected risk of
Misuse might cause electric shock, generation of
heat, fire, or rupturing, which will result in burns,
serious injury or blindness.
• Never use the QC-10N for charging devices other than
the LI-10N. Also, never use the QC-10N for devices other
than the MP-ΣN / MP-ΣNⅡSeries.
• Never connect an AC adapter other than the exclusive AC
adapter (RC60G-12DSBS) (provided) to the QC-10N.
• Do not disassemble or modify the QC-10N and
RC60G-12DSBS.
• Do not insert metal objects inside the product body.
• Do not leave the product near infants.
• Do not immerse the product in water or allow it to get wet.
• If you notice heat generation or abnormal odors,
immediately disconnect the plug from the AC power
outlet.
• Do not place heavy objects on the QC-10N or
RC60G-12DSBS, or subject them to dropping or other
impact.
14.09.11H (04)

Safety Precautions

that might result in death or
serious injury.
might result in death or serious
injury.
serious injury or property
damage.
- 2 -
DANGER
- 3 -
WARNING
Misuse might cause electric shock, generation of
heat, fire, or rupturing, which will result in burns,
injury or blindness.
• When connecting or disconnecting the LI-10N or MP-ΣN /
MP-ΣNⅡSeries, be sure to do so by holding the connector.
• Do not connect to an electronic type transformer.
• Do not charge a short-circuited LI-10N.
• Do not use the QC-10N near objects that generate heat or
block heat discharge.
• Insert each of the connectors firmly as far as possible.
- 4 -
CAUTION
Misuse might cause obstruction or physical damage.
• Connect connectors correctly.
• Charge indoors within a temperature range of 0 to 40°C.
• Do not charge or store in humid or dusty locations.
• When not charging, be sure to disconnect the
RC60G-12DSBS from the AC power outlet.
- 5 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QC-10N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sibata QC-10N

  • Page 1 • Do not connect to an electronic type transformer. Warning Indications • Do not charge a short-circuited LI-10N. DANGER: Impending danger is expected • Do not use the QC-10N near objects that generate heat or that might result in death or block heat discharge. serious injury.
  • Page 2 Exclusive AC adapter RC60G-12DSBS [connector shape B type] Input voltage 100 to 240 VAC 50/60 Hz (2) If the red LED is lit even with the QC-10N connected, charging is not possible since the battery temperature at Output voltage 12 VDC (4 A) the start of charging is out-of-range.

Table of Contents