Download Print this page

Sibata QC-10KN Operation Manual

Quick charger

Advertisement

Quick Links

CODE 090860-110
Quick Charger QC-10KN Operation Manual
Thank you for buying the QC-10KN Quick Charger. Before
using the QC-10KN, be sure to thoroughly read this manual
to ensure correct use.
Also, keep this manual in a safe place so that it can be
referred to whenever necessary.
- 1 -
The precautionary information that appears in this manual is
for ensuring that the product is used safely and for
preventing injury to you and other people and damage to
equipment.
It is all important for ensuring safety and so be sure to read it
thoroughly before using the product and observe it during
use.
Warning Indications
DANGER: Impending danger is expected
WARNING: There is an expected risk that
CAUTION: There is an expected risk of
Misuse might cause electric shock, generation of
heat, fire, or rupturing, which will result in burns,
serious injury or blindness.
• Never use this product for other than the LI-10N / LI-10KN,
MP-ΣN / MP-ΣNⅡ/ MP-ΣKNⅡseries.
• Never connect an AC adapter other than the exclusive
AC adapter (UNI345-1238) (provided) to the product.
• Do not disassemble or modify the QC-10KN and
UNI345-1238.
• Do not insert metal objects inside the product body.
• Do not leave the product near infants.
• Do not immerse the product in water or allow it to get wet.
• If you notice heat generation or abnormal odors,
immediately disconnect the plug from the AC power
outlet.
• Do not place heavy objects on the QC-10KN or
UNI345-1238, or subject them to dropping or other
impact.
21.05.11K (03)
Safety Precautions
that might result in death or
serious injury.
might result in death or serious
injury.
moderate injury or property
damage.
- 2 -
DANGER
- 3 -
WARNING
Misuse might cause electric shock, generation of
heat, fire, or rupturing, which will result in burns,
injury or blindness.
• Connect connectors correctly.
• Insert each of the connectors firmly as far as possible.
• When connecting or disconnecting the LI-10N / LI-10KN or
MP-ΣN / MP-ΣNⅡ/ MP-ΣKNⅡseries, be sure to do so by
holding the connector.
• Do not use the product near objects that generate heat or
block heat discharge.
• Do not connect to an electric type transformer.
• Do not charge a short-circuited LI-10N / LI-10KN.
- 4 -
CAUTION
Misuse might cause moderate injury or property
damage.
°C
• Only charge in a room of 0 to 40
.
• Do not charge or store in humid or dusty locations.
• When not charging, be sure to disconnect the
UNI345-1238 from the AC power outlet.
- 5 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the QC-10KN and is the answer not in the manual?

Questions and answers

Summary of Contents for Sibata QC-10KN

  • Page 1 Thank you for buying the QC-10KN Quick Charger. Before injury or blindness. preventing injury to you and other people and damage to using the QC-10KN, be sure to thoroughly read this manual equipment. • Connect connectors correctly. to ensure correct use.
  • Page 2 The QC-10KN only charges when connected directly to the charging connector on the LI-10N / LI-10KN. Exclusive AC adapter UNI345-1238 (2) When QC-10KN is connected and the red LED lights up, Input voltage 100 to 240 VAC 50/60 Hz it is in a state where charging cannot be performed Output voltage 12 VDC (3.8 A)

This manual is also suitable for:

090860-110