Page 3
statement Without the written permission of the company, no unit or individual shall extract or copy part or all of the contents of this manual without authorization, and shall not disseminate it in any form. Due to product version upgrade or other reasons, the contents of this manual will be updated from time to time.
Page 4
After installation, please check the correctness to avoid human injury and equipment component damage due to wrong connection during power Abnormal power failure may cause equipment damage or abnormal function. If the equipment is used in the environment of frequent power failure, please provide ups.
Screw package product introduction 2.1 product description U82/T82 is a high-performance and reliable product. This product supports a variety of recognition modes such as white list recognition, IC card verification. It adopts the idea of industrial appearance design, with light and thin body, smooth lines, high recognition rate, large storage capacity, fast recognition and so on.
T82 Equipment dimension drawing, as shown in Figure 2-2. chart 2-2 2.3 structure description The appearance of U82 equipment structure is shown in Figure 2-3. Please refer to the real object for details. chart 2-3...
Page 8
Serial name explain number Led fill light Fill RGB camera Infrared fill light Fill in light for infrared camera Infrared camera Take infrared images RGB camera Take visible images speaker Play voice prompt Tail line output hole Panel tail line hole The appearance of T82 equipment structure is shown in Figure 2-4.
installation instructions Please check before installing the product to ensure that the product can work normally. This document provides wall mounted installation methods for reference, and other installation instructions can be obtained by contacting our personnel; 3.1 gate type installation chart 3-1 Step 1: as shown in Figure 3-1, if there is no hole on the gate panel, it is necessary to use a punch to make a circle with a diameter of 35mm on the...
Page 10
Step 4: as shown in Fig. 3-4, loosen the screw on the upright support, adjust it to an appropriate angle and tighten it again; chart 3-4 3.2 wall mounted installation chart Step 1: as shown in Figure 3-5, fix the sheet metal on the back of the machine body with screws ①;...
Step 5: as shown in Figure 3-5, use screws ④ to fix the access control terminal and the wall hanging bracket; Step 6: after installation, as shown in Figure 3-6; chart wiring instructions 4.1 U82 schematic diagram of tail line chart 4-1...
U82 interface description Serial Interface Interface Pin color number name description description RJ45 Wired network RJ45 network port network port port communication 12V power 12V power input DC_12V supply USB2.0 USB2.0 Interface interface Relay Output IO signal WHITE output 1...
Page 13
4.2 T82 schematic diagram of tail line chart 4-2 T82 interface description Serial Interface Interface Pin color number name description description RJ45 Wired network RJ45 network port network port port communication 12V power 12V power input DC_12V supply USB2.0 USB2.0 Interface interface Relay Output IO signal...
communication WHITE/PURPL RS485+ BROWN RS485- WG_OUT Wigan signal BLACK output YELLOW/GRAY WG_OUT_D WHITE/YELLO WG_OUT_D Alarm signal input, BLACK ALM_IN、 door magnetic SEN_IN PINK ALM_IN1 signal input YELLOW/BLAC ALM_IN2 WHITE/GREEN SEN_IN1 Equipment Use 5.1 starting equipment After correct installation, connect the power adapter to the mains and the other end to the equipment power interface to start the equipment.
5.2.2 login web interface 1. DHCP login (factory default DHCP); Enter the IP address in the upper left corner of the device display in the browser to enter the web login interface, as shown in Figure 5-1 and figure chart 5-1 IP display of main interface chart 5-2 IP access of input device 2.Static IP login: Step 1: click the <...
EU DECLARATION OF CONFORMITY Hereby, Bresee Technology Co.,Ltd. declares that the radio equipment type DR21-8UW , DE21-8TW is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity Please see attachment DOC Letter FCC Caution.
Page 17
§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.