Page 3
statement Without the written permission of the company, no unit or individual shall extract or copy part or all of the contents of this manual without authorization, and shall not disseminate it in any form. Due to product version upgrade or other reasons, the contents of this manual will be updated from time to time.
Page 4
After installation, please check the correctness to avoid human injury and equipment component damage due to wrong connection during power Abnormal power failure may cause equipment damage or abnormal function. If the equipment is used in the environment of frequent power failure, please provide ups.
packing list If you find any items damaged or missing, please contact your local dealer in time. item number unit DR21-8UW Tail line - grid port Tail line - full function The power adapter Accompanying instructions certificate warranty card Wall mount bracket set Wall mount bracket sticker Screw package product introduction...
2.2 product dimensions Equipment dimension drawing, as shown in Figure 2-1. chart 2-1 2.3 structure description The appearance of equipment structure is shown in Figure 2-2. Please refer to the real object for details.
chart 2-2 Serial name explain number Led fill light Fill RGB camera Infrared fill light Fill in light for infrared camera Infrared camera Take infrared images RGB camera Take visible images Mic outlet For voice intercom speaker Play voice prompt Tail line output hole Panel tail line hole installation instructions...
3.1 wall mounted installation chart Step 1: as shown in Figure 3-1, fix the sheet metal on the back of the machine body with screws ①; Step 2: Mark four positioning points on the wall to confirm the installation position of the wall hanging support; Step 3: as shown in Figure 3-1, align the four holes on the wall hanging bracket with the wall positioning point, lock four self tapping screws ②, and fix the wall hanging bracket;...
wiring instructions 4.1 schematic diagram of tail line chart 4-1 4.2 interface description Serial Interface Interface Pin color number name description description RJ45 Wired network RJ45 network port network port port communication 12V power 12V power input DC_12V supply USB2.0 USB2.0 Interface interface Relay...
WHITE/RED RS485 RS485 BLACK communication WHITE/PURPL RS485+ BROWN RS485- WG_OUT Wigan signal BLACK output YELLOW/GRAY WG_OUT_D WHITE/YELLO WG_OUT_D Alarm signal input, BLACK ALM_IN、 door magnetic SEN_IN PINK ALM_IN1 signal input YELLOW/BLAC ALM_IN2 WHITE/GREEN SEN_IN1 Equipment Use 5.1 starting equipment After correct installation, connect the power adapter to the mains and the other end to the equipment power interface to start the equipment.
5.2.2 login web interface 1. DHCP login (factory default DHCP); Enter the IP address in the upper left corner of the device display in the browser to enter the web login interface, as shown in Figure 5-1 and figure chart 5-1 IP display of main interface chart 5-2 IP access of input device 2.Static IP login: Step 1: click the <...
EU DECLARATION OF CONFORMITY Hereby, Bresee Technology Co.,Ltd. declares that the radio equipment type DR21-8UW , DE21-8TW is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity Please see attachment DOC Letter FCC Caution.
Page 13
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.