Troubleshooting - Snailax SL-632N User Manual

Troubleshooting

PROBLEM
Massage heads rotating at reduced
speed.
Device switches off suddenly.
Device fails to start.
Jerky motion of vibrations from device.
SOLUTIONS
The load on the massage heads is
excessive. Reduce pressure and try again.
Device may have been in use for 15
minutes. Auto-shutoff function activated.
Continue using by pressing the ON button
after resting the unit for 15 minutes.
Over-heat protection function activated.
Device is switched off for your safety.
Please rest device for 15-30 mins before
restarting.
Check if device has been used for more
than 15 mins. If so, let device rest for 15
mins before continuing. Device may
require longer time to cool in warmer
environments.
Check if adapter is plugged into socket.
Check if adapter output is connected to
device power inlet wire.
Excessive pressure may have applied
onto the device. Reduce the load and try
again.
8