Touchscreen Programing - Honeywell 5403 User Manual

TOUCHSCREEN PROGRAMMING - OPTIONAL
TOUCHSCREEN PANEL OVERVIEW
Programming Symbols
Lock / Clear
Unlock / Programming
AP
Administrator Passcode
RP
Received Code (6-9 digits)
NP
New Code (4-9 digits)
Programming Tips
Complete all the programming steps in the programming mode
within 5 seconds.
Use the key to clear entries in case a wrong button is pushed.
AP
Administrator Passcode:
(Admin Passcode is located on the Honeywell App
under Safe Settings).
Lock button
- Use to lock Safe
Lock
Unlock button
Unlock - Used to unlock Safe
Programming - Used in programming steps
Batteries (not included)
The electronic lock requires four (4) High Quality AA
Alkaline batteries. When all 4 batteries are installed in
the correct position, you will hear beeps and the keypad
will illuminate. DO NOT TOUCH the keypad until the
keypad stops illuminating.
VERY IMPORTANT
The safe must be connected to the
App in order to program the keypad.
By default the factory touchscreen passcode is
1234.
Change the Administrator passcode
can easily be remembered by you after
connecting to a Safe.
Once you connect the App to the Safe, the
factory touchscreen passcode will be changed
to a new code, which can be found in the Safe
Settings.
13
AP
so it