Table of Contents
Advertisement
Adjusting the setting
1 Press the MENU key to bring up the OSD.
2 Using the
/
wish to adjust.
3 The Setting menu can be used to adjust the screen Wide Mode and other important
settings.
4 Select PIP to adjust picture‐in‐picture settings. The PIP signal so urce needs to be
selected manually.
5 When using PIP/PBP, "Wide Mode", "6-axis Hue", "6-axis Saturate", "ACM", "Gamma",
"sRGB", and "Super Sharpness" will be enabled for the main source display.
6 "Wide Mode" is not supported when using PBP function.
7 DP Format selection, the default out of DP signal setting is DP 1.1.
User can follow the setting message to confirm selection of DP 1.1 or DP 1.2.
keys, select
Setting from the OSD. Then navigate to the feature you
15
Advertisement
Table of Contents
