Table of Contents
Advertisement
Troubleshooting
Common Fix
A. If PCE-MM200 device and PCE-MM200 application were working OK and suddenly
stops working properly, Please try the following:
1. Unplug or Power off PCE-MM200 device from PC, close PCE-MM200 program.
2. After waiting for 1 minute, plug or power on PCE-MM200 device, open PCE-MM200
program
B. For under Recommended PC specification (see 4 th page), maybe PCE-MM200
program does not work properly, please use MiViewCap-Beta.exe on CD: run it directly -
double click.
C. For Vista first version OS system (Nor Vista SP1), maybe there is this issue: there are not
any images (black screen) on preview area, please try: Toolbar->setting->default->Ok)
D. After PC resume from standby or hibernate, maybe PCE-MM200 will not work properly,
please close it and re-open to try.
E. If USB PCE-MM200 microscope driver can't be installed completely, maybe your pc OS is
not XP SP2 or above, please update it. If you installed the driver and application
completely, but there is a tips: please connect PCE-MM200 device after running the
program, please uninstall PCE-MM200 and reboot PC, then re-install PCE-MM200 to try
again.
In this direction will find a vision of the measurement technique:
http://www.industrial-needs.com/measuring-instruments.htm
NOTE: "This instrument doesn't have ATEX protection, so it should not be used in potentially explosive
atmospheres (powder, flammable gases)."
info@tursdaletechnicalservices.co.uk
Advertisement
Table of Contents
