Operational And Maintenance Precautions - Toshiba G3+ PACK Operation Manual Addendum

Operational and Maintenance
Precautions
• Turn off, lockout, and tag out the main power, the control power, and instrumentation connections
before inspecting or servicing the drive, or opening the door of the enclosure.
• Turn off, lockout, and tag out the main power, the control power, and instrumentation connections
before proceeding to disconnect or connect the power wiring to the equipment.
• The capacitors of the ASD maintain a residual charge for a period of time after turning the ASD off.
The required time for each ASD typeform is indicated with a cabinet label and a Charge LED.
Once the ASD power has been turned off, wait for at least the minimum time indicated on the
enclosure-mounted label and ensure that the Charge LED has gone out before opening the door of
the ASD.
• Turn the power on only after attaching (or closing) the front cover and DO NOT remove the front
cover of the ASD when the power is on.
• DO NOT attempt to disassemble, modify, or repair the ASD. Call your Toshiba sales representative
for repair information.
• Do not place any objects inside of the ASD.
• If the ASD should emit smoke or an unusual odor or sound, turn off the power immediately.
• The heat sink and other components may become extremely hot to the touch. Allow the unit to cool
before coming in contact with these items.
• Remove power from the ASD during extended periods of non-use.
• The system should be inspected periodically for damaged or improperly functioning parts,
cleanliness, and to ensure that the connectors are tightened securely.
G3+ Pack Addendum
WARNING
9