Advertisement
Available languages
Available languages
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Guarantee (UK only)
If your toaster goes wrong within
one year from the date you
bought it, we will repair or replace
it free of charge provided:
you have not misused,
l
neglected or damaged it;
it has not been modified (unless
l
by Kenwood);
it is not second-hand;
l
Troubleshooting Guide
Problem
Toaster does
not operate.
Carriage lever
not staying
down
Uneven
Browning.
Toast colour
too light or
too dark.
Burning smell
or smoke
from slots.
If none of the above see 'Service and Customer Care'.
English
Cause
No power.
Toaster not plugged
in.
1 Slice of bread being
toasted.
Bread slices of
different size,
freshness or thickness
being toasted at same
time.
Wrong browning
setting used.
Crumb tray full.
Food particles stuck
to element or loose in
toasting slots.
it has not been used
l
commercially;
you have not fitted a plug
l
incorrectly; and
you supply your receipt to
l
show when you bought it.
This guarantee does not affect
your statutory rights.
Solution
Check toaster is plugged in.
Check the fuse/circuit breaker
in your home.
The lever will not stay
down unless the toaster is
plugged in.
For best results ensure that
the bread slices are of an even
thickness, freshness and size.
In order to achieve uniform
browning we recommend you
wait a minimum of 30 seconds
between each toasting so that
the control can automatically
reset. Alternatively select a
lower setting when additional
toasting is carried out.
Select a higher or lower
browning setting.
Refer to 'Hint' section.
Unplug before checking the
slots.
Remove any loose food
particles.
Remove and clean the crumb
tray.
7
Advertisement
