Table of Contents
Advertisement
Quick Links
Easy to use
The Transmation CheckMate 400 checks, calibrates and
measures all the thermocouple devices in your plant.
Toggle the display between °C and °F or lock it for full
time use of either temperature scale.
Simulate temperature and measure thermocouples
directly with the pocket sized CheckMate 400.
The CheckMate 400 is easy to use. Select a
thermocouple type and use the decade push-buttons for
the precise output you need.
Source thermocouple
Calibrate recorders, digital indicators, computer inputs or
any other instruments that measure thermocouples.
Easily set any value to 1° C or F with the intuitive UP
and DOWN pushbuttons. Separate buttons for each digit
make adjustments fast and easy.
Recall output settings
The "Quik-Chek" pushbuttons provide rapid checking of
any three points in each range. Quik-Chek settings
remain in memory even when the CheckMate 400 is
powered off.
Measure thermocouple probes
Verify proper sensor function and measure temperatures
by attaching a thermocouple to the CheckMate 400.
Toggle the display between °C and °F or configure it for
full time use of either temperature scale.
Display the present reading, maximum or minimum by
pressing the READ, MAX or MIN pushbuttons to quickly
check how much the temperature has varied or the
stability of control.
Thermocouple Calibrator
CheckMate™ 400
• Calibrate thermocouple
instruments
Check transmitter inputs
Simulate sensors into controllers and
indicators
Read Thermocouple probes
• Four built-in T/C types
Types J, K, T, E and millivolt
Built-in cold junction compensation
• Compact and low cost
The CheckMate 400 fits easily into your
pocket and budget.
• Easy to use
One touch to set the output & function
• Accuracy to ±0.025%
Within ±1°C
• Long lasting alkaline batteries
Four "AA" Alkaline cells can provide months
of typical use
• Settable "Quik-Chek®"
pushbuttons
Set any HI and LO output in each range
Advertisement
Table of Contents
Related Manuals for Transcat CheckMate 400
Summary of Contents for Transcat CheckMate 400
- Page 1 Simulate temperature and measure thermocouples directly with the pocket sized CheckMate 400. The CheckMate 400 is easy to use. Select a thermocouple type and use the decade push-buttons for the precise output you need.
- Page 2 LCD display. The READ functions measure the desired signal. Auto-off CheckMate 400 can be set up to turn itself off Min/Max after 30 minutes of inactivity. The internal timer is To read the maximum or minimum input since read...
- Page 3 4) Use the proper thermocouple wire and corresponding miniature 4) Use a thermocouple wire and corresponding miniature thermocouple connector to connect the CheckMate 400 to the thermocouple connector to connect the CheckMate 400 to the thermocouple. instrument.
- Page 4 Ordering information Part No. CheckMate 400 Thermocouple Calibrator 23409T Included with each CheckMate 400 are: T/C wires for types J, K, T and E, 1 meter long, terminated at one end with a miniature thermocouple connector Carrying Case PN 1887113 Rev A April 2002 ©2002 Transmation, Inc.
Need help?
Do you have a question about the CheckMate 400 and is the answer not in the manual?
Questions and answers