1.1 Introduction • Do not use explosive or readily flammable Before you start using the Compleo X-pay substances in the vicinity of the payment payment terminal, read this document carefully terminal. and follow the instructions.
3.3 Mounting of the payment terminal on the wall • Mounting, electrical installation, commis- sioning, maintenance and repair may only Minimum distances: be carried out by a trained electrician. The electrician must be registered in the regis- ter of installers. • Mounting, electrical installation, commis- sioning, maintenance and repair may only be carried out by a trained electrician.
Figure 2: Prefabricated foundation - side view Figure 4: Foundation plate - side view Figure 3: Prefabricated foundation - top view For the use of the prefabricated foundation Figure 5: Foundation plate - top view proceed as follows: For the prefabricated foundation, dig an excavation pit with a minimum area of 100 To cast your own foundation with foundation x 80 cm and a minimum depth of 60 cm.
The distances between the empty conduits are shown in Figure 5: • The Compleo X-pay payment terminal Foundation plate - top view. requires a suitable circuit breaker and residual current device. 13. Pour out the excavation pit so that you obtain an even mounting surface.
EurotestXC ST. If none of the test devices Rated peak withstand <6 kA is available to you, the missing tests must current Ipk be performed by a Compleo specialist Rated short-time with- partner. stand current Icw • Enter the result of the test in a test report.
Need help?
Do you have a question about the X-pay and is the answer not in the manual?
Questions and answers