GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: SFR9905xx SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
s Class I and must be earthed s for indoor use only s IP20 rated INSTALLATION • Always ensure the wall surface is flat and smooth e the wall surface is flat and smooth • This unit is fitted with a gasket – this must not be removed: the gasket is to stop ted with a gasket –...
• All earth connections must be made and maintained. Use green/yellow sleeving on earth conductors that are not insulated • Check all electrical connections are secure with all exposed copper within the terminal and no loose strands of cable. • Fit the unit into a suitable wall box taking care not to compress, damage or trap any cables, and secure with the screws provided.
USB CHARGING FUNCTION This product is designed for charging portable USB devices only and contains a short circuit and overload protection feature. If there is no power from the USB socket unplug the connected device. Check to ensure the USB socket and USB device have not come into contact with water, liquid or debris and the cable to the device is not damaged.
WARRANTY This product has a warranty of 2 years from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement.
Page 7
Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with CE marking ML Accessories Ltd. Declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation CE marking legislation...
Page 8
Manufacturers Declaration of Conformity For ML Accessories (Knightsbridge) Electrical products in accordance with UKCA marking ML Accessories Ltd. declare that all products have been designed, manufactured, and tested in accordance with the requirements of the relevant legislation UKCA marking legislation UK SI 2016 No.
Page 9
Supplied By: (UK) Manufacturer ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road, Dunstable LU5 4LT, www.mlaccessories.co.uk (EU) Authorised Representative nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547 Düsseldorf, Germany, Email: eprel@nnuks.com DCJUN22_V1...
Need help?
Do you have a question about the SFR9905 Series and is the answer not in the manual?
Questions and answers