Table of Contents
Advertisement
Approved Usage
This modem is approved only for the following:
•
Storage of telephone numbers for retrieval by a
predetermined code
•
Detection of initial proceed indication
•
Automatic calling/Automatic answering
•
Tone detection
•
Operation in the absence as a secondary proceed
indication
•
Loudspeaker facility
This modem is NOT suitable for use as an extension to a
payphone.
This modem is not approved for connection to UK private
speechband services.
This modem does not support the automatic redial
function.
Any other usage will invalidate the approval of your
modem, if, as a result, it then ceases to conform to the
standards against which approval was granted.
The approval of this modem is INVALIDATED if the
apparatus is subject to modification in any material way
not authorised by the BABT, or if it is used with
or connected to external software that has not been
formally accepted by BABT.
Storage of Numbers
It is advisable to check the telephone numbers stored in
your modem immediately after programming.
In order to prevent the misdirection of class and network
interference, please ensure that all manually programmed
telephone numbers are correctly entered.
The number you enter to dial may optionally contain a
PAUSE character (a comma) to allow this modem to
operate with a PABX. Each comma gives a two-second
delay.
10
WARNING: When using this device, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and injury to
persons, including the following:
•
Do not use this product near water, for
example, near a bathtub, wash bowl, kitchen
sink or laundry tub, in a wet basement or
near a swimming pool.
•
Avoid using this product during an electrical
storm. There may be a remote risk of electric
shock from lightning.
•
Do not use this product to report a gas leak in
the vicinity of the leak.
•
Always disconnect the modem cable before
opening the equipment enclosure or touching
an uninsulated modem cable, plug, or
internal components.
•
If this product was not provided with a
telephone cable, use only No. 26 AWG or
larger telecommunication cable in order to
reduce the risk of fire.
•
Do not plug a modem or telephone cable into
the Network Interface Card (NIC) receptacle.
SAVE THESE INSTRUCTIONS
Advertisement
Table of Contents
