Lanberg RS Series Quick Installation Manual page 9

Quick Installation Guide
Rack type PoE+ switches
1) Important pre-recommendations and information regarding rack type PoE switch usage
1.1) Introduction
PLEASE KEEP THIS MANUAL – set of recommendations and user manuals for Lanberg rack type PoE
switches, detailing the models supported below:
RSFE-24P-2C-360
•
contains logistics and technical data, instructions, and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above-mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user's
manual. Keep this manual for later use. All photos, drawings included in the manual are for reference only.
1.2) Contents of the package
NOTE: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.
• Rack type PoE switch,
• Quick installation guide,
• Mounting ears for installation in 19",
• Power cord: RSFE-24P-2C-360 model: AC 100 V ~ 240 V, 50 / 60 Hz, max. 5 A, DC 55 V, 0.6 A.
NOTE: The contents of the packaging, its individual elements and rack type switches may vary depending
1.3) General safety precautions
on the particular model.
The device specifications must be strictly observed when turning the product ON, using it and
•
connecting the equipment to any external products,
• The device must not be used to work outside the rated values: 100 ~ 240 V, 50 / 60 Hz (switch).
The warranty does not cover any damage caused by a deviation from these values when using
the device,
• Mains outlet (AC) should be easily accessible and located near the equipment. Remember to connect
the device only to a grounded socket,
• NEVER allow a situation where sparks or flames could occur near the device. The aftermath of such
case could have very negative consequences for people and things in the vicinity,
• If smoke comes out of the device, disconnect the AC power supply as soon as possible,
• In the event of a fire, immediately and (without unnecessary delay) disconnect the power supply and
notify the fire department of the situation by dialing their assigned emergency number, in the country
of your stay,
• The use of the device does not require specialized training or electrical qualifications. It has a similar
function to the PoE switches, indicating of its intended use to power compatible terminal equipment.
The device can be used for IP, CCTV surveillance, access points in hotels, warehouses, companies, etc.,
• The product is intended for indoor use. Do not rebuild and / or modify the products and / or
its components,
The manufacturer and distributor are not responsible for any damages resulting from improper use
•
and improper handling of the product (not in accordance with this manual).
E-mail: support@lanberg.eu
www.lanberg.eu
Lanberg © 2015-2021
PL | EN
9 | 14