Related Manuals for BE Ag & Industrial BE-P1BFK
Summary of Contents for BE Ag & Industrial BE-P1BFK
- Page 1 FIXED MOULD BOARD PLOUGH BE-P1BFK OPERATIONS & PARTS MANUAL FOR MODELS: • BE-P1BFK PURCHASE DATE MODEL NO. SERIAL NUMBER DEALER...
-
Page 2: Usage Instructions
TABLE OF CONTENTS TECHNICAL DATA Introduction USAGE INSTRUCTIONS Before Use Attaching Plough to the tractor Note TRACTOR PREPARATION Instructions for Tractor Preparation Adjustments Warning for the Driver Danger Draft of the M.B. Plough Adjustments for Deeper Ploughing MAINTENANCE Maintenance Instructions Storage of Machine after Work Instruction for Driver EXPLODED VIEW &... -
Page 3: User Responsibility
(The BE AG & INDUSTRIAL Factory may inspect equipment or parts before warranty claims are honored.) 5. All costs incurred by the dealer for traveling to or transporting the equipment for warranty inspection and claims will be borne by the customer. BE-P1BFK USER MANUAL... -
Page 4: Technical Data
Readjust the plough alignments if need be. The first bar point will pick up a lot or a little soil depending on how far or near the rear wheel is to the furrow respectively BE-P1BFK USER MANUAL... - Page 5 2. Reducing or increasing, as per the soil, the tilt angle. A correctly tilted plough tends to penetrate better. 3. If the ground is covered with trash, set the plough in almost vertical position and add weight to the plough. In such soils notched plough gives better results. BE-P1BFK USER MANUAL...
- Page 6 1. When M.B. plough is ready to use don’t stand between M.B. plough & the tractor. 2. Properly fit the three point linkage as mentioned above & lock with the lynch pin. 3. Never turn or reverse the tractor when the plough is engaged in the soil. BE-P1BFK USER MANUAL...
- Page 7 NYLOCK NUT M18X2.5MM 10280020 HEX HEAD BOLT M16X125X2MM (8.8 10260367 1.12 NYLOCK NUT M16X2MM 10280005 GRADE) 1.13 SPRING WASHER 12 MM 10270003 HITCH PIN 20MM 10020013 1.14 NYLOCK NUT M12X1.75 (P) 10280025 MIDDLE JOINTER MB PLOUGH 1 71200053 BOTTOM BE-P1BFK USER MANUAL...
- Page 8 COLTER FLAT R.H.S (ROUND TYPE) 79490015 COLTER HOLDING THREADED BUSH 79490017 HEX HEAD BOLT M10X25X1.5MM (8.8 GRADE) 10260361 HEX HEAD BOLT M18X160X2.5MM (8.8 GRADE) 10260402 SPRING WASHER 18 MM 10270006 NYLOCK NUT M18X2.5MM 10280020 R PIN 3/8 10020076 BE-P1BFK USER MANUAL...
- Page 9 BE-P1BFK USER MANUAL...
- Page 10 B RA B E R EQ .CO M WGSALES@BRABEREQ.COM PHONE: 604-850-7770 FAX: 604-850-7774 TOLL FREE PHONE: 1-877-588-3311 TOLL FREE FAX: 1-800-665-7334 BE-P1BFK USER MANUAL...
Need help?
Do you have a question about the BE-P1BFK and is the answer not in the manual?
Questions and answers