Huawei Quidway S3700 Series Manual page 59

Quidway S3700 Series Ethernet Switches
Hardware Description
No.
As shown in
can press the mode switching button to switch the display modes of interface indicators. The
status of a mode indicator represents the display mode of the related interface indicator. For
example, the mode indicator of S3700-28TP-PWR-EI is off and the interface indicators are in
STAT state by default. When you press the mode switching button once, the mode indicator
turns green and the related interface indicator enters the speed state. When you press the mode
switching button for a second time, the mode indicator turns orange and the related interface
indicator represents the PoE power status. When you press the mode switching button for a third
time, the mode indicator turns red and the related interface indicator represents the stack status.
When you press the mode switching button for a fourth time, the mode indicator restores to the
default state (off). If you do not press the mode switching button within 45 seconds, the mode
indicator automatically restores to off.
The following table describes the meanings of indicators.
Table 6-4 Description of indicators in different modes
Display Mode
STAT
Issue 02 (2011-11-21)
Indicator Identifier
Figure 6-3, the button marked "5" is the mode switching button. On an S3700, you
Status
Off
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Green The service interface
indicator indicates
the interface speed.
After 45 seconds, the
service interface
indicator
automatically
restores to off.
Orange The service interface
indicator indicates
the PoE status. After
45 seconds, the
service interface
indicator
automatically
restores to off.
Red The service interface
indicator indicates
the stack ID. After 45
seconds, the service
interface indicator
automatically
restores to off.
Description
The interface is not connected or
has been shut down.
The interface is connected.
6 List of Indicators
53