Freestyle Libre 2 Quick Start Manual

Quick Start Guide for
FreeStyle Libre 2 app
A FreeStyle Libre product
●
1
Assemble and Apply Sensor to the back of your upper arm
STEP 1
Select site on back of upper arm.
Do not use other sites as these may
result in inaccurate glucose readings.
Note: Avoid scars, moles, stretch
marks, lumps, and insulin injection
sites. To prevent skin irritation, rotate
sites between applications.
STEP 4
Line up dark mark on Sensor
Applicator with dark mark
on Sensor Pack. On a hard
surface, press down firmly
on Sensor Applicator until it
comes to a stop.
STEP 7
Place Sensor Applicator over site
and push down firmly to apply
Sensor.
CAUTION: Do not push down on
Sensor Applicator until placed
over prepared site to prevent
unintended results or injury.
Setup Overview
Refer to your User's Manual for full system instructions and information.
iPhone
Download FreeStyle Libre 2
from App Store
Sensor
Pack
Codes on labels
must match
STEP 2
Wash site using a plain soap,
dry, and then clean with alcohol
wipe. Allow site to air dry before
proceeding.
STEP 5
Lift Sensor Applicator out of
Sensor Pack.
STEP 8
Sensor
Gently pull Sensor Applicator
away from your body.
●
1
Assemble and Apply Sensor
to the back of your upper arm
●
2
Set up App
Sensor
Applicator
●
3
Use the App to scan your Sensor
CODE XXX
After the start-up period, you can use
the App to check your glucose
Lid
Peel lid completely off Sensor Pack.
Unscrew cap from Sensor Applicator.
CAUTION:
must match on Sensor Pack
and Sensor Applicator or
glucose readings will be
incorrect.
Sensor Applicator is ready to
apply Sensor.
CAUTION:
now contains a needle. Do not
touch inside Sensor Applicator
or put it back into Sensor Pack.
Make sure Sensor is secure.
Discard used Sensor Applicator
and Sensor Pack according to
local regulations.
STEP 3
Cap
Sensor codes
Sensor Pack | Envase del sensor
Customer Service | Atención al cliente:
1-855-632-8658
CODE
XXX
XXXXXXXXXXX
YYYY-MM-DD
STEP 6
Sensor Applicator
STEP 9