Advertisement
Operation
(contd.)
The Tree-lopper is manufactured to cut trees and wood only.
Do not use the Tree-lopper to pull stumps out.
Do not use the Tree-lopper for bulldozing or rooting.
Do not bear the weight of the excavator on the Tree-lopper.
Do not use the excavator's arm functions, or attempt to rotate the Tree-lopper during the
cutting cycle.
Do not exceed the rated capacity of the Tree-lopper.
Never operate the Tree-lopper when people are within the felling area.
Never operate the Tree-lopper with people near the blade.
Always stop the excavator's engine & remove the starter key from the cab when
performing any maintenance or lubrication on the shear. Always depressurize the
hydraulic circuit before carrying out any maintenance work.
Be aware of any stumps, branches, rocks or other debris getting caught in the Tree-
lopper – particularly between the cylinder and the frame. Serious damage will occur to
the blade cylinder if it is cycled with material trapped between the cylinder and frame.
Do not operate on steep inclines, or where the excavator is on unstable terrain.
Always be aware of the stability of the machine and the safe load handling limits of the
excavator. Always check the stability of the ground on which the excavator is to be
operated.
Hoses and fittings should be inspected regularly for damage and wear, and should be
replaced as needed.
Regular cleaning of dirt and chips from between frames is recommended.
Always follow the safety procedures for the excavator as recommended by the
manufacturer.
The Tree-lopper is capable of felling a larger tree than may be safely carried by the
excavator; extra care is required when felling large trees. Additional cutting can be
performed after the tree is felled by rotating the shear to a vertical position.
Grease the pivot points regularly through the grease nipples provided. If the Tree-lopper
is being used continuously, greasing should be performed at least every hour.
If the blade becomes chipped or worn it is permissible to re-dress it with a grinder to
maintain performance.
Check the tightness of all bolts periodically.
Advertisement
