Table of Contents
Advertisement
NeuroTrac™ Labour TENS Operation Manual
Electrode Placement
Recommended Types:
100 x 50 mm (rectangular) for 4 electrodes or 204 x 50 mm (rectangular) for
two electrodes.
Place the electrode approximately 2 inches either side of you spine in the
positions indicated by the drawings.
When using two pairs of 100 x 50 mm electrodes, place the upper pair of
electrodes between T10 & L1 and the lower pair of electrodes between S2 &
S4 as shown on the left diagram.
For 1 pair of 204 x 50 mm electrodes, place them halfway between T10 and S2
as shown on the right diagram.
Please refer to the Dermatome chart on page 14 or ask your mid wife,
physiotherapist or Doctor for more information.
8
Advertisement
Table of Contents
