CONTROL INSTALLATION 2. INSTALLATION 2.0. General Notes This control conforms to the National Electric Code and is certified by the Underwriters Laboratory. Installation should adhere to all national and local electric codes, and be installed by a qualified electrician or contractor. Any electrical wiring or modifications to the control I/O should be performed with the power disconnected.
CONTROL SETTINGS 3. SETTINGS 3.0. Network Connection 3.2. Changing the Network Settings on the 001 The Delta-T Pro comes preset with network parameters that in If the above parameters are not acceptable to your network con- most cases will not be compatible with existing network configu- figuration, the control must be directly hooked up to a computer rations.
Page 5
CONTROL SOFTWARE MAP Navigation 169.254.148.50:80. S O L A R H O T W A T E R...
SOFTWARE OVERVIEW / SETTINGS 4. SOFTWARE 4.0. Energy Exporting 4.1. Energy Page Graphs DAILY: Displays two graphs; the top graph displays energy rate of collection for the current day, hour by Both versions of the Delta-T Pro store sensor and calculated energy data hour from the start of collection (in kBTU / hr).
FUNCTION REFERENCE 5. ADVANCED SETTINGS 5.0. Advanced Settings Page Function Reference VARIABLE TITLE DESCRIPTION DEFAULT Grundfos Flow & Temp Checkbox for use of a digital Grundfos fl ow and temperature sensor checked Sensor Range Text fi eld for entering range of Grundfos fl ow sensor in Liters / Minute 2-40 Pulse Flow Sensor Checkbox for use of a pulse (analog) type fl...
Page 8
Delta-T Pro Case Mounting Template 7.00” 4.25” 7.00” 2.00” 6.50” SCALE = 1:1 Heliodyne, Inc. • 4910 Seaport Avenue • Richmond, CA 94804 T: 510.237.9614 • F: 510.237.7018 www.heliodyne.com Sales Inquiries: sales@heliodyne.com Information and Support: info@heliodyne.com...