8 - 1 1/4" Pan head screw Make sure you have all parts before beginning assembly. If you need a part, contact Living Spaces Attach the one bed rail (C) to the bottom of the end assemblies (D) with 4 lag bolts and 4 washers, and tighten.
Page 3
7030-00165 KIT MAS90: 5043-43220 7109TTW TWIN FRAME HARDWARE QTY: DESCRIPTION: 1/4 X 4 HEX LAG BLK 3/16 USS FL WASHER BLK 6 X 1 1/4 PHIL FLAT PARTICLE BOARD SCREW...
Page 4
4 -Casters with 4 plastic inserts Make sure you have all parts before beginning assembly. If you need a part, contact Living Spaces. Attach two mattress rails (D) to end assemblies(C) with 8 lag bolts and 8 washers, and tighten. The height of the mattress rails is adjustable.
00500 SAFETY WARNING Our Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1.
Page 7
4453 7030-00420 STAIRWAY CHEST WITH BUNK BED The stairway chest has been designed for use as a free standing unit. However for your convenience, if you desire to attach the stairs to your bunk bed we have included four 2" angle brackets. We recommend using these to attach the top center side vertical of the stairway unit to one or two of the end cross members or side rails of the bunk depending on how you position the stairway.