Gude Expert Power Control 1100 Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Expert Power Control 1100/1101

Table of Contents

Need help?

Do you have a question about the Expert Power Control 1100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gude Expert Power Control 1100

Page 3: Table Of Contents
Expert Power Control 1100/1101 Table of content Table of content Chapter 1 Safety Advice Chapter 2 Description Chapter 3 Hardware Content of delivery Connections Installation Status LED Chapter 4 Configuration DHCP Network settings with GBL_Conf Configuration via webinterface 4.3.1 Configuration - Power Ports 4.3.2...
Page 4 Expert Power Control 1100/1101 Table of content Factory settings Chapter 7 Support Chapter 8 Contact Chapter 9 Declarations of conformity © 2012 Gude Analog- und Digitalsysteme GmbH...
Page 5: Chapter 1 Safety Advice
Please, never leave connected equipment unattended, that can cause damage (e.g. iron heater, etc.). Description The Expert Power Control 1100/1101 facilitates the remote switching of electrical devices via a TCP/IP network. For installation, the device is simply connected to a power supply and to the local network.
Page 6: Connections
Installation 1.) Connect the AC power connector on the back of the Expert Power Control 1100/1101 with a power outlet, or plug the device into an outlet. The machine starts and is ready for operation after a short moment. The LEDs should be lit.
Page 7: Chapter 4 Configuration
Enter a free IP address and the according netmask in the entry mask, then save these changes by clicking on Program Device gSaveConfig. Restart the firmware of Expert Power Control 1100/1101, so that the changes will take effect. Now click on Search in order to have the new network configuration displayed.
Page 8: Configuration Via Webinterface
Expert Power Control 1100/1101 Configuration Configuration via webinterface Go to the website of Expert Power Control 1100/1101. Enter the IP address of Expert Power Control 1100/1101 into the address line of your internet browser: http://”IP address of Expert Power Control 1100/1101”/ and press LOGIN.
Page 9: Watchdog
Expert Power Control 1100/1101 Configuration 4.3.1.5 Reset Duration If the Reset button in the switching menu is triggered, the device will turn of the specified Power Port, wait the time entered here (in seconds) and then it will turn on the power port again.
Page 10: Configuration - Ip Address
Use DHCP Here you can set, if Expert Power Control 1100/1101 shall get its TCP/IP settings directly from your DHCP server. If DHCP is activated, Expert Power Control 1100/1101 proves if a DHCP server is active inside of your LAN. Then Expert Power Control 1100/1101 requests TCP/IP settings from this server.
Page 11: Configuration - Ip Acl
IP Access Control List The IP Access Control List (IP ACL) is an IP filter for the Expert Power Control 1100/1101. If the filter is active, only those hosts and subnets whose IP addresses are entered in the list, can contact the device to change settings or switch the ports.
Page 12: Configuration - Http
Password protected access can be activated here. In this case, a user and an admin password have to be defined. Passwords have a maximum lengths of 15 characters. Administrators are authorized to switch all ports and to modify the settings of Expert Power Control 1100/1101 and of all ports. The username of the admin is “admin”.
Page 13: Configuration - Messages
Expert Power Control 1100/1101 Configuration 4.3.6 Configuration - Messages 4.3.6.1 Peak measurement period Here you can set how long the peak values of the sensors and the current measurement should be recorded. 4.3.6.2 Generate Messages This entries control the threshold values (Min- Max values) at which alerts are send via SNMP traps, Syslog and email.
Page 14: Configuration - Snmp
4.3.7.7 Trap Version Here you can choose between SNMP-traps standard v1 and v2c. More information about the SNMP functions of the Expert Power Control 1100/1101, you can find in chapter SNMP, on http://www.gude.info/wiki or ask our support team.
Page 15: Configuration - Syslog
IP address (and, if necessary the HTTP port), e.g.: 192.168.0.2:8000. 4.3.7.9 SNMP To get detailed status information of Expert Power Control 1100/1101 SNMP can be used. SNMP communicates via UDP (port 161) with Expert Power Control 1100/1101: You can use SNMP to switch the power ports as well.
Page 16: Configuration - E-Mail
Syslog Port If syslog is active enter here the port number, that your Syslog server uses to receive syslog information. More information about Syslog you can find in chapter Syslog, on http://www.gude.info/wiki or ask our support team. 4.3.9 Configuration - E-Mail 4.3.9.1...
Page 17: Chapter 5 Operation
You can see the state of the Power Port from the color of the (on/off) LED at the front (green = on / red = off). Switching by Webinterface Go to the website of Expert Power Control 1100/1101. Enter the IP address of Expert Power Control 1100/1101 into the address line of your internet browser: http://”IP address of Expert Power Control 1100/1101”/ and press LOGIN...
Page 18: Sensor
Batchmode The Power Port of the Expert Power Control 1100/1101 can be switched on or switched off for a selectable delay (1-30 sec. or 1-30 min.). After the chosen delay the selected port will be switched off or switched on again automatically.
Page 19: Energy Measurement
In order to update the firmware the program GBL_Conf.exe and the latest firmware are needed. Start the device in bootloader mode and run the program GBL_Conf.exe. On the left side of the program window all Gude devices that are in the network are listed. Select the device, that should be updated, click on Program DeviceFirmware Update and determine the location of the new firmware.
Page 20: Technical Information
Please notice that all current settings will be deleted. The default settings will be loaded when the firmware of the device is restarted the next time. Support In case of further questions, about installation or operation of the device, please have look at www.gude.info/wiki or do not hesitate to contact our support (mail@gude.info). Contact Gude Analog- und Digitalsysteme GmbH Eintrachtstraße 113...
Page 21 Grenzwerte - Grenzwerte für Oberschwingungsströme EN 61000-3-2:2006 Electromagnetic compatibility Part 3-2 : Limits – Limits for harmonic current emissions EN 60950-1:2006 Sicherheit von Einrichtungen der Informationstechnik EN 60950-1:2006 Safety for Industrial Control Equipment Köln, 04.08.2011 Dr. Michael Gude, Geschäftsführer / CEO...
Page 22 Expert Power Control 1100/1101 Declarations of conformity...

This manual is also suitable for:

Expert power control 1101

Gude Expert Power Control 1100 Manual

Chapter 1 Safety Advice

Chapter 2 Description

Chapter 3 Hardware

Chapter 4 Configuration

Chapter 5 Operation

Chapter 6 Features

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Gude Expert Power Control 1100

Summary of Contents for Gude Expert Power Control 1100

This manual is also suitable for:

Table of Contents