Insignia NS-RMT3D21 User Manual page 8

STB BRAND
Rogers, Cogeco, Vidéotron
Shaw, Cable Axion, Eastlink
Spectrum
Verizon, Frontier Communications, TELUS
1 Turn on your device and point the Insignia universal
remote control at it (if you are setting up a
streaming device, make sure a movie or TV program
is playing).
2 Press the device button you want to set up (for
example TV).
3 Press and hold the SETUP button until the LED on
your remote button blinks twice.
4 Press and hold the number button for your brand
and device, as listed in the tables above (or
example, 3 for a Phillips TV). Your remote will send
the power signal every three seconds.
5 Release the button as soon as your device turns off.
The LED blinks twice and your remote will now
operate your device.
Note: If one or more buttons do not work as expected,
start again at step 2. Your remote will start with the next
code in memory.
Setup method 2 - device codes
If your device brand is not listed in the SimpleSet tables,
you can set up your device by using device codes.
1 Turn on your device and point the Insignia universal
remote control at it.
2 Press the device button you wish to set up (for
example - TV).
3 Press and hold the SETUP button until the LED on
your remote button blinks twice.
8
www.insigniaproducts.com
PRESS
7
8
9
0